资源列表
ADS1115
- 该程序是ADS1115的例子程序，利用了I2C，1602液晶对转换后的数字量进行显示。-The program is an example of a ADS1115 program, using the I2C, 1602 LCD digital converted to display.
stm8_project
- IAR STM8 DEMO LED闪烁代码-IAR STM8 DEMO
stm8_project_DDEMO
- iar stm8 demo led闪烁代码
src_cPh
- 蓝桥杯比赛用板各个模块的测试程序，可用于准备比赛，亦可用于该板的实际开发。-Blue Bridge Cup with a test program board of each module can be used to prepare the game, can be used for the actual development of the plate.
pic16f_kanmengou
- 实现PIC16F877A单片机的内部看门狗的设置和复位功能的实现。-Implementation of PIC16F877A MCU internal watchdog set and reset functions
Experiment8_PWM
- 实现PIC16F877A单片机PWM波形输出的实验，用示波器观察输出波形。-Realization of PIC16F877A MCU PWM waveform output experiment, output waveform oscilloscope for observation.
LCD12864
- 在PIC16F877A单片机上，测试基于ST7920控制芯片的LCD12864的显示。-On the PIC16F877A MCU, test based on ST7920 control chip LCD12864 display.
IR_RELAY
- 基于PIC16F877A单片机，实现串口发送命令控制继电器的工作状态的程序。-Based on PIC16F877A MCU, the realization of serial port to send command control relay the working state of the program.
ad7705
- 使用51单片驱动ADC芯片AD7705，使用模拟SPI的方式对AD7705进行读写操作。-Use of 51 single-chip driver ADC chip AD7705, use of the method of simulation SPI to read and write operations AD7705.
project
- 串口电压采集系统，用AD采集信息并通过串口发送-Serial voltage acquisition system
project
- 用单片机的定时器写的一个功能很齐全的时钟，采用DS1302时钟芯片，并通过LCD1602显示屏显示信息-MCU timer function to write a very complete clock, using the DS1302 clock chip and display information LCD1602 display
Digital-Tube
- 数码管显示驱动程序。基于STC单片机，采用定时器定时切换，以避免干扰其他程序执行，但略做修改可移植其他单片机。-Driver of Digital Tube display.Based on STC MCU, using timer to avoid disturbint other programme.can be easily imigrated.