资源列表
arduino-ds1302-master
- ARDUINO DS1302 库，有示例，真实可用的代码库。-ARDUINO DS1302 library, with examples, the real code base available.
oled
- 基于stm32f103系列的oled显示程序，通信方式为iic-Based stm32f103 series oled display program, the communication system is iic
main
- 这是用于单片机控制的延时开关程序，简单方便。-This is used for single-chip microcomputer control of the delay switch, simple and convenient.
pp
- 这是用单片机编写的用于继电器控制的程序，可以简单控制继电器从而控制其他器件-This is prepared by the use of SCM procedures for the control of the relay can be a simple control relay to control other devices
J3
- 这是由单片机c51编程的，用于控制静态数码管显示的程序-This is a single chip C51 programming, for the control of static digital tube display program
Lj_Cloud_Box-V0.122
- stm8s 采用usart、tim、等驱动，TCP连接到服务器-Stm8s USES usart, Tim, drive, such as a TCP connection to the server
W5500-TCP_Client
- KEIL环境下的W5500 TCP/UDP Clent端驱动。 设置IP、端口即可使用-KEIL environment W5500 TCP/UDP Clent back-end drivers. Set the IP, port can be used
stc-key-seg
- stc12c5a60s2单片机按键测试，用74HC595扫描四位数码管显示-STC12C5A60S2 MCU button test, using 74HC595 dynamic scanning four digital tube display
SSPx
- LPC1768的SPI程序（接dataflash），经KEIL4编译正常。-The LPC1768 SPI program, compiled by KEIL4 normal.
PID
- 用simulink搭的离散PID，可以用自动生成代码再下载进单片机运行-With simulink take discrete PID, can be used to automatically generate code and then downloaded into the microcontroller operation
BDC
- 用simulink搭建的直流电机模型，可以和控制程序仿真运行-Built with simulink DC motor model, you can run the simulation and control procedures
TEST_IV_3_MO_CALI_KKK
- 用simulink编写的汽车节气门控制程序，可以自动生成可用的代码，在汽车上试验过-Written by simulink automotive throttle control program that can automatically generate code available in the car tested