资源列表
基于STM32的LCD显示时钟和闹钟
- 基于STM32的LCD显示时钟和闹钟，闹钟到达，显示屏显示时间以及蜂鸣器响
RGB调色
- 使用C51单片机开发，针对可调色RGBLED灯，实现调色和呼吸灯(Use C51 single chip computer to develop color modulation and breathing lamp for color modulation RGBLED lamp.)
lcd_3.5_4.3
- 显示图片，通过键盘切换显示动态图片，烧写工具oflash(Display pictures, display dynamic pictures by switching on the keyboard)
S7-300 PLC模块手册2016
- S7-300模块手册,编程，选型样本，接线图。(S7-300 Module Manual, Programming, Sample Selection, Wiring Diagrams.)
用NTC热敏电阻做温度采集
- NTC热敏电阻实验详细说明，里面含有实验原理图，以及DEMO样例程序，仅供参考(The NTC thermistor experiment is detailed, which contains the experimental schematic diagram and the DEMO sample program for reference only.)
433遥控demo
- 433无线遥控例程 STM8S003f3 简单例子程序 带有注释 可以配对学习编码 短按学习键(STM8S003f3 433mHZ send and receive)
读取DS18B20序列号
- 通过51单片机读取DS18B20的序列号，显示在LCD1602上。(The serial number of DS18B20 is read by 51 single chip computer, which is displayed on LCD1602.)
STM32F4_RFID_WritingAndReading_K-mean_analysis
- 对RFID数据的读取，且对提取数据进行K-means聚类分析，异常数据警报，STM32F4平台可以直接使用，只需要改相应引脚。(The reading of RFID data and the k-means clustering analysis of the extracted data, abnormal data alerts, STM32F4 platform can be used directly, only the corresponding pins need to be mo
can_bootloader
- STM32F103引导单片机程序启动代码已调试(Guide the single chip computer program)
stm8-software-sd-card
- 完全采用软件模拟SPI获取扇区数据，无需上拉电阻。(Completely using software spi to optain sd card data, no need extra up pull resistors.)
dclock
- 51单片机和DS3231SN实现的时钟程序(clock program using 51 mcu and ds3231sn)
SimuKeyb
- 51单片机透过串口实现的键盘程序(key board program using serial port and 51 mcu)