资源列表
picsd
- temperature sensor with peak and LCD screen LM016 with sd card
ACC采集,ACC与倾角输出
- 对于平台式惯导系统来说，初始对准就是要将平台坐标系向导航坐标系对准。工程文件夹下新建如下6个文件夹，分别用于放置源文件和生成的文件。（其中list和obj文件用于存放相应类型的生成文件，可以使编译完的工程文件夹内文件整洁，不至于有太多文件混在一起）(For the platform inertial navigation system, the initial alignment is to alignment the platform coordinate system to the navi
OLED_SPI
- 这是SPI协议的OLED驱动代码,适合初学者学习.(This is the OLED driver code of the SPI protocol, suitable for beginners to learn.)
八路温度巡检仪表源程序
- 用简单的51单片机制作八路温度巡检仪表，绝对好用，AD用的ADC0809,传感器用的PT100(Making eight road temperature inspection instruments with a simple 51 single chip microcomputer)
main
- 串口通讯主机程序，主机发送字节，等待从机响应，附带crc 校验(USART communication routines of master board)
GISS_Divergence_Meter1
- 基于STM32F103C8T6的8位辉光管（11X锁存）的DS3231时钟模块驱动程序(Eight bit glow tubes (world line variability tester) produced by the clock module of DS3231 I2C communication are used as MCU by STM32F103C8T6)
Motor_Control - A）O
- 使用STM32F103C8T6的TIM2四路按键可控ＰＷＭ输出程序(Using STM32F103C8T6's TIM2 four button controlled PWM output program)
Program Project
- STM32F103C8T6的完整工程模版 可直接编译无需修改 用于快速编程 和工程创建(The complete engineering template of STM32F103C8T6 can be compiled directly without modification for rapid programming and engineering creation)
MSTP
- 使用STC89C52RC平台编写的8位辉光管11X74HC573,、DS3231（I2C）驱动程序的完整源码(The complete source code of the 8 bit glow tube 11X74HC573, DS3231 (I2C) driver using the STC89C52RC platform)
FreeRTOS_Tasksuspend_recover
- STM32在FREERTOS下的任务测试实验代码(STM32's task test code under FREERTOS)
can
- AT90CAN128单片机的CAN功能驱动，包括收发功能(CAN function drive of AT90CAN128 MCU, including transceiver function)
恒温烙铁源码
- 1.8寸OLED屏显示的源码，已通过KEIL检验，压缩包里面有详细说明。