资源列表
24位ADC LTC2442
- 使用MDK5编写的STM32F103的驱动，可以从24位的AD LTC2442芯片读取电压(Using the STM32F103 driver written in MDK5, the voltage can be read from a 24 bit AD LTC2442 chip)
NRF24L01
- 利用MDK5开发软件，编写的STM32驱动NRF24L01进行无线传输输出，包含了接收和发送两个工程(Using MDK5 development software, the STM32 drives NRF24L01 for wireless transmission, including two projects for receiving and sending.)
CH378读写u盘程宇和相关资料
- 使用MDK5编写的程序，利用STM32F103驱动CH378模块对U盘就行读写，还包含了相关的资料(Using the program written in MDK5, use STM32F103 to drive the CH378 module to read and write to the U disk, and also include relevant information.)
STM32利用网口CH395传输数据源码及资料
- 使用MDK5编写的程序，利用STM32F103驱动CH395模块利用网口和电脑之间通信，还包含了相关的资料(Using the program written in MDK5, using the STM32F103 to drive the CH395 module to communicate between the network and the computer, the related information is also included.)
Ethernet
- 使用W5500实现单片机接入网络，进行网络通信(W5500 driver package)
ESP8266-12F
- 使用MDK5编写的程序，利用STM32F103驱动ESP8266wifi模块进行数据传输，还包含了相关的资料(Using the program written by MDK5 and using STM32F103 to drive the ESP8266wifi module for data transmission, it also contains related data.)
bsp_uart
- 比较稳定通用的串口驱动代码，适用于stm32(More stable and universal serial port driver code, suitable for stm32)
bsp_spi
- stm32f407 SPI+DMA通信，测试稳定(Stm32f407 SPI+DMA communication)
DHCP
- w5500通过DHCP自动获取IP地址的源代码(W5500 Automatically Obtaining IP Address Source Codes Through DHCP)
DNS
- w5500配置DNS服务的源代码，测试可用(w5500 Configure the DNS service source code)
mq2 (2)
- MQ135气体传感器对氨气、硫化物、苯系蒸汽的灵敏度高，对烟雾和其它有害气体的监测也很理想。这种传感器可检测多种有害气体，是一款适合多种应用的低成本传感器。据说使用的时候需要预热，我是直接用的。 树莓派 VCC <---> 1 #3.5V GND <---> 6 DO <---> 7(code #!/usr/bin/env python # encoding: utf-8)
实时时钟
- 基于DS3231以及51单片机、OLED显示屏的实时时钟程序代码，该程序可在OLED上显示实时的时间(Based on DS3231 and 51 single chip computer, OLED display real-time clock program code, the program can display real-time time on the OLED.)