资源列表
S12_LCD12864
- S12的12864程序驱动，带源码，方便网友做各种可视实验。-S12 of 12864 process-driven, with source code to facilitate the users do all sorts of visual experiments.
S12_PWM
- S12PWM发生模块，供网友参考，实现直流电机或舵机的控制，输出频率和占空比可调。-S12PWM occurrence module, for users reference, to achieve the control of DC motor or steering gear, the output frequency and duty cycle adjustable.
S12_RTI_Clock
- S12实时时钟实验，S12的另一个实现时间基准的程序，可配合脉冲累加器测频等。-S12 Real-Time Clock test, S12, another realization of the program time base can be measured with the pulse frequency and accumulator.
S12_SPI(send)
- S12SPI主机发送程序，可和74164扩展IO口。-S12SPI host sends procedures, and 74 164 IO expansion port.
S12_TC1_TC2
- S12的TC1和TC2测周期源程序，以此作为范例，网友可参考程序利用剩余的TCx测量周期，脉宽，频率，进而测量PWM频率占空比等。-S12 of the TC1 and TC2 test cycle source, as an example, users can refer to procedures for use of the remaining TCx measurement cycle, pulse width, frequency, and then measure the freq
c100
- 十天学会单片机实例100 非常基础且好用的代码。-10 days SCM instance learn very basic and easy to use 100 code.
displayChinese
- 汉字显示放大程序，通过读取点阵字库文件，获得所要显示的汉字区位码对应的点阵，显示出相应的汉字，并可进行放缩。-Chinese character display amplification process, by reading the bitmap font file, get the character to display the location code corresponding to the lattice, shows that the corresponding Chinese
2
- 水温控制系统 （1）可键盘设定控制温度值，并能用液晶显示，显示最小区分度为0.1℃； （2）可以测量并显示水的实际温度。温度测量误差在±0.5 ℃内； （3）水温控制系统应具有全量程（10℃—70℃）内的升温、降温功能（降温可用半导体制冷片、升温用800W以内的电加热器）； （4）在全量程内任意设定一个温度值（例如起始温度±15℃内），控制系统可以实现该给定温度的恒值自动控制。控制的最大动态误差≤±4℃，静态误差≤±1℃，系统达到稳态的时间≤15min（最少两个波动周期）。
usart
- AVR MEGA32单片机串口通信程序 仿真软件：protues -AVR MEGA32 microcontroller serial communication program simulation software: protues
crc16_oneself
- crc校验程序，采样MEGA32单片机，可以设置为查表或者计算方式-crc check program, sampling MEGA32 microcontroller, can be set to look-up table or formula
cc1100jie
- mega8和CC1101的接收C程序 用的AVR Studio 编写的程序-mega8 and CC1101 receiver C programs written using the AVR Studio program
nrf2401_send
- mega16和NRF2401的无线通信--发送的， 采用avr Studio编程-mega16 and NRF2401 wireless communications- sent using avr Studio Programming