资源列表
LCD12864A_430
- 基于MSP430F22X4系列的液晶显示器12864的驱动程序
usb
- 基于MSP430单片机的U盘读写USB驱动程序
PID
- 这是一个用AT89S52写的PID子程序！很好用的！
kjjs
- LPC935单片机应用 4位显示，显示精度：1分钟；四位拨码开关处于高位， 最小设定时间：1分钟 ,CD4060 Q4=2048HZ 开关处于位置3 输出 2007.3
search
- 一线总线协议可以在一条纵线上搜索多个DS18B20的ROM
UART
- // This program demonstrates how to configure the C8051F060 to write to and read // from the UART interface. The program reads a word using the UART0 interrupts // and outputs that word to the screen, with all characters in uppercase
SPI
- // This program accesses a SPI EEPROM using polled mode access. The F06x MCU // is configured in 4-wire Single Master Mode, and the EEPROM is the only // slave device connected to the SPI bus. The read/write operations are // tailored to access
Header_Files
- // This program accesses a SPI EEPROM using polled mode access. The F06x MCU // is configured in 4-wire Single Master Mode, and the EEPROM is the only // slave device connected to the SPI bus. The read/write operations are // tailored to access
ADC
- // This program measures the voltage on an external ADC input and prints the // result to a terminal window via the UART. // // The system is clocked using the internal 24.5MHz oscillator. // Results are printed to the UART from a loop with
SMBus
- This example demonstrates how the C8051F06x SMBus interface can communicate // with a 256 byte I2C Serial EEPROM (Microchip 24LC02B). // - Interrupt-driven SMBus implementation // - Only master states defined (no slave or arbitration) // - T
SIM_EVB305
- 希姆通sim300的硬件电路图，包括管脚定义等详细信息
flash
- cs850实验板的flash存储器编程，实现NOR闪存芯片的厂商ID读取、区块（sector）擦除、字节编程等基本的闪存操作