资源列表
51menu
- 在单片机上实现菜单控制，利用了结构体，简单却堪称经典，内有清晰视频解析。-This program is to achieve the menu by the struct on the MCU.easy to learn and convenient to use.
EM78
- EM78系列单片机全教程-EM78 Series MCU full tutorial
NRF24L01L
- 基于Cortex-M3(TI官方LM3S811开发板)平台做的NRF24L01的无线收发程序，亲测可用，传输具体实测大于100m,单次传输最多32个字节-Based on Cortex-M3 (TI official LM3S811 development board) platform do NRF24L01 transceiver procedures, up to 32 single-byte
infrared-car
- 自己做的四驱红外遥控小车 实现了前进、后退、左右转弯、原地旋转，加减速的控制 适合单片机学习-Infrared remote control to do their own four-wheel drive car to achieve a forward, backward, turn left or right, pivot turn, acceleration and deceleration control suitable for single-chip learn
GPIO
- LM3S811（Cortex-M3）的GPIO口基本操作，包括GPIO口库函数的详细使用教程。另外怎样将Cortex-M3按照51单片机的位操作的习惯进行设置，使Cortex-M3也能进行位操作，从而非常容易的将51程序移植到Cortex-M3 注:程序基于LM3S811的开发板开编写的！-LM3S811 (Cortex-M3) GPIO port basic operations, including GPIO port library functions detailed tuto
LED-clock
- 自己做着好玩的，原来是用液晶屏做了个可调时钟，现在想想用数码管做个看看。可仿真，附有源代码，用普中科技开发板hc6800-Em3调试正常。-Doing their own fun, original LCD screen is made with adjustable clock, and now think to be a tube with a digital look. Can be simulated, with the source code, using science and te
32LED
- 实现32颗LED心形灯的控制，开始时所有的灯闪亮一次，然后两边一起向下流水，然后杂乱闪亮，变换出各种优美图形-Achieve 32 heart-shaped LED light control, starting with all the lights flash once, and then down along both sides of the water, and then messy shiny, transform a variety of beautiful graphic
GPIO-learning
- Cortex-M3（LM3S系类）的GPIO口的详细使用方法，包含多个例程源码和详细的使用说明，带你入门arm-Cortex-M3 (LM3S system class) of the GPIO port detailed use, contains multiple routines source code and detailed instructions for use
Interrupt
- Cortex-M3（LM3S系类）的中断的详细使用方法，包含多个例程源码和详细的使用说明，带你入门arm-Cortex-M3 (LM3S system class) interrupts the detailed use of methods, including multiple routines source code and detailed instructions for use, take you on arm
OLEDdriver-
- OLED驱动，K60液晶，包括初始化函数，字符设置函数。-OLED driver, K60 LCD, including the initialization function, the character set functions.
51serial-communication
- 51单片机串口通信配置模板 定时器方式2: 8位自动重装 波特率 96-51 single-chip serial communication configuration template Timer Mode 2: 8-bit auto reload Baud 9600
51The-time-interrupt
- Trick 须要放在中断函数中，不然会出现线程不同步的现象。 -Trick must be put into the interrupt function, otherwise there will be no thread synchronization.