资源列表
stm32Flight-Control
- 本程序是以mpu6050和nrf为基础的stm32飞控程序。-This procedure is based mpu6050 and nrf based stm32 flight control procedures.
STM32Remote-procedure
- 飞控遥控程序，用nrf24l01发送控制飞行器飞行的程序。-Flight control remote control procedures, using nrf24l01 transmission control aircraft flight procedures.
K60_LCD_Flash
- k60的flash读写程序，可以在lcd上事实显示读到的flash中的数据-k60 of flash read and write procedures can read about in the lcd display on the facts of flash data
EEPROM
- 本程序运行时,按下K1将向EEPROM中写入1~21,按下K2时写入无规律的21个数,按下K3时读取EEPROM中的21个数并循环显示.所读写的21个数中,前20个在EEPROM中的地址是透明的(0x0001~0x0014),最后的第21个数其地址是不透明的.-This program is running, press K1 will be 1 to 21 is written in the EEPROM, when writing press K2 irregular number 21,
LCD1602
- 1602LCD工作于四位模式实时显示当前时间，本程序液晶数据端口仅使用了四只引脚,实现日期时间的实时显示.-1602LCD works in four modes display the current time, the program uses only the LCD data port four pins, date and time of the real-time display.
SHT75
- SHT75温湿度传感器测试,本程序运行时,虚拟终端中将持续刷新显示温湿度信息.SHT75传感器程序(参照SENSIRION公司提供的8051版代码改编)-SHT75 temperature and humidity sensor test, the program runs, the virtual terminal will continue to refresh the display temperature and humidity information. SHT75 sensor pr
WDT
- 看门狗应用.本程序系统启动时,LED1点亮,正常运行时,LED1熄灭,LED2开始闪烁程序设置看门狗溢出时间为:1.9s,定时器必须在此时间内复位看门狗(喂狗),否则会引起系统复位,LED1再次点亮后熄灭,LED2重新开始持续闪烁.-Watchdog application of this procedure when the system starts, LED1 lights up during normal operation, LED1 off, LED2 starts flashing
main
- 基于Cypress公司的PSoC单片机的超声波电机驱动控制程序，实现调频调速、调相调速、正反转控制。通过按键和电位器进行控制，并可以通过串口用上位机进行控制。-Cypress' s PSoC microcontroller based ultrasonic motor drive control procedures, frequency modulation speed, phase speed, reversing control. Through the keys and poten
TEA576717
- STC89S52+TEA5767收音机程序-STC89S52+TEA5767 radio program
lock
- 4×4键盘及8位数码管显示构成的电子密码锁-4 × 4 keypad and 8 digital tube display constitutes an electronic code lock
mainPWM-AD-LCD
- 可用单片机IO口直接驱动笔段式LCD，成熟产品。-Available microcontroller IO port directly drive segmetn LCD, mature products.
isd4002
- 语音电子门锁C语言程序，STC89C51D+ISD4002应用-Voice electronic lock C language program, STC89C51D+ ISD4002 application