资源列表
485
- 在stm32f103zet6上实现485通信，通过串口助手发送一个值单片机返回一个一样的值，发送时一回车结束。-In stm32f103zet6 achieve 485 through the serial port to send an aide to return a value of the same chip value, sending a carriage return.
main
- 自己编写的51单片机系统程序，用于实现单片机的数据通信的基本功能。-I have written 51 SCM system program for the realization of single-chip data communication the basic functions.
zhichengxu
- 单片机应用程序，用于控制发光二极管的显示，闪烁等。-Microcontroller applications, light-emitting diode is used to control the display flicker.
CH452W21
- 51单片机的开发例程，用于实现单片机的基本功能。-51 MCU development routines for the basic functions of the microcontroller.
1602-and-ds18b20
- 关于ds18b20的源码，已经在51上测试通过，可以直接拿去用-About ds18b20 source code, has been tested on the 51, you can directly take to use
iic_24c02
- C51的IIC和24C02的简洁程序。代码量较小。-C51 simplicity of the IIC and 24C02 procedures. Small amount of code.
Hitechmanual
- 适用于MICROCHIP 18系列单片机的 HI-TECH C语言编译器使用说明书-HI-TECH c tool for pic18 mcu family
SFR
- 非常有用的寄存器配置例子，个人自己整理总结的。有了它不用经常去查寄存器如何配置了。-Very useful registers configuration example, individual own sorting summary. It don t often go to check how to configure the registers.
SCTCamDemo
- LPC4357单片机的摄像头OV7670驱动程序，显示在320*240的TFT屏上。-LPC4357 microcontroller camera OV7670 driver, display 320* 240 TFT screen.
jduchuanganqi
- 为角度传感器CAN通信程序代码，代码是在keil环境条件下编译的，使用的是stm32库函数-As the Angle sensor CAN communication program code, the code is compiled in the keil environment conditions, using the stm32 library functions
5-IO-Keypad
- Arm Cortex M3 STM32F103芯片按键功能实现。-Arm Cortex M3 for 5 IO Keypad.
ADCPDMA
- Arm Cortex M3 STM103C 采样实验程序。-Arm Cortex M3 STM103C for ADC case.