资源列表
Sound-localization-program
- 本程序是基于2012年15省赛区大学生电子设计TI杯竞赛题,经过反复调试能较好的满足实验的各项要求。-This procedure is based on the 2012 15 Provincial Division Undergraduate Electronic Design Contest TI Cup title, after repeated testing can satisfy the requirements of the experiment.
Tilt-sensor
- 本程序是基于stm32单片机的倾角传感器实验代码。经调试后能满足一般精度要求。-This procedure is based on stm32 SCM tilt sensor test code. By the debugger to meet the general accuracy requirements.
nrf24l01
- 本程序是基于stm32的nrf24L01无线收发程序,经调试能满足一般数据收发功能。-This procedure is based on stm32 the nrf24L01 wireless transceiver procedures, testing to meet the general data transceiver functions.
LD3320
- 本程序是基于stm32的3轴数字陀螺仪L3G4200D,包含软件SPI和硬件SPI程序两部分。-This procedure is based on stm32 3-axis digital gyroscope L3G4200D, including software and hardware SPI SPI program in two parts.
SDIOtest
- 本实验将实现如下功能:开机的时候先检测字库,然后检测SD卡是否存在,如果SD卡存在,则初始化SD卡,并通过串口1打印SD卡相关信息,然后开始查找SD卡根目录下的PICTURE文件夹,如果找到则显示该文件夹下面的图片文件(支持bmp、jpg、jpeg或gif格式),循环显示,通过按KEY0和KEY2可以快速浏览下一张和上一张,WK_UP按键用于暂停/继续播放,DS1用于指示当前是否处于暂停状态。如果未找到PICTURE文件夹/任何图片文件,则提示错误。DS0来指示程序正在运行。在正常显示图片的时候
FatFS
- STM32基于3.5固件库 SDIO+4bit模式驱动的FatFS(0.07e)移植
microcontroller
- 89C51单片机开发例程 步进马达 C语言-Stepping motor 89C51 microcontroller C language routines developed
I2C
- 基于STM32F103的i2c,通讯验证可用-STM32 i2c
GSM
- 通过GPRS传递温度值,并具有报警功能,一旦温度超过20,即可报警。-Temperature value transmitted via GPRS, and an alarm once the temperature over 20, to the police.
danpianji_study
- _51系列单片机设计实例(2009年度畅销榜)-_51 Series microcontroller design examples (the 2009 bestseller list) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
maichongleijiaqi
- 系统上电后,数码管低三位显示000,按下PLUSE按键,显示数值加1-System power, low three digital tube display 000, press PLUSE button to display the value by 1
canzongxian
- 系统上电后LED闪烁两次,然后读取AD0的值,发送给CAN总线 ,并显示在数码管低三位。 如果从CAN总线接收到数值,则显示在高三?-System power LED blinks twice, then read AD0 values sent to the CAN bus, and displayed on the digital low three. If the value received from the CAN bus is displayed i
