资源列表
measurement-of-injector
- 喷油嘴参数自动测量，通过油泵，电子天平和单片机快速的测量出汽车喷油在不同压力和电压下的流速，死区时间等参数。-Injector automatic measurement parameters, the oil pump, electronic scales and fast measurement of automotive microcontroller injection pressure and voltage at different flow rates, dead time and
c-pulse
- 利用脉冲计数测量汽车变速器输入、输出轴转速-Automobile transmission measurement using pulse counting input and output shaft speed
ADC0832P1602
- 51单片机ADC0832+LCD1602 proteus 仿真源程序，包括proteus原文件，可以直接仿真。在keil+proteus 7.8上测试通过。-51 MCU ADC0832+ LCD1602 proteus simulation program, including proteus original documents can be directly simulated. In keil+ proteus 7.8 on the test.
Motor-control-schematics
- 电机控制的原理图，针对需要控制电机的行业人员使用-Motor control schematics, control the motor industry for the need to use
Test_JTAG
- stm32测试程序，测试JTAG是否正常，-stm32 test procedures, test whether the normal JTAG
exter_key
- 利用中断来触发的矩阵键盘，在数据输入时可以实现最迅速的反应且对系统的其他部分不造成时间占用的影响 -Interrupt to trigger the use of a matrix keyboard, data entry can achieve the most rapid response, and the rest of the system time to take effect without causing
KB4
- 键盘程序类似手机的九宫格输入模式,可以实现使每个键通过短时间内的按下次数不同识别不同的字符输入，节省键盘对系统控制面板的空间占用 -Squares procedure similar to cell phone keypad input mode, you can achieve so that each key is pressed through a number of different short identify different character input, the key
KEY
- 普通的键盘矩阵扫描和识别程序,利用C语言实现，可直接调试-Ordinary keyboard matrix scanning and identification procedures, using C language, can be directly commissioning
ADI_Analog_camp_Amp1
- ADI模拟技术训练营——系列讲座，主要是讲放大器的-ADI simulation technology training camp- a series of lectures, mainly about the amplifier
GPIOcontrol
- 针对ARM LPC2131芯片的GPIO控制程序。-According to the ARM LPC2131 chip GPIO control procedures.
VideoSecure
- 基于单片机对视频信号进行处理，实现加解密。-The video signal processing based on single chip, to achieve encryption and decryption
chaoshengceju
- 使用超声波模块在1602上实时显示距离 精确到毫秒 范围从20mm到5-Using ultrasonic module in the 1602 real-time display distance accurate to the millisecond range from 20mm to 5000mm