资源列表
2dang
- 通过控制IO口的输出从而控制继电器的导通和断开。-By controlling the output of the IO port to control the relay on and off.
lesson3
- 使用定时器0的定时方式1去控制P10口的LED灯的亮灭。-Using Timer 0 Mode 1 to control the timing of P10 port LED lights off.
AVR-car
- avr 寻迹小车 代码，供参考，做毕业设计也可以。-avr car tracing code, for reference
C
- 用573锁存器控制和单片机脚直接位选控制(非译码器控制)数码管上显示数字-Latches with 573 control and direct bit microcontroller pin select control (non-decoder control) digital display digital
dan-si-pai-gongzuo
- 了解步进马达使用及驱动程序编写，采用单相四拍通电驱动时序-Learn to use stepper motors and drivers prepare, using power-driven single-phase four-beat timing
RS232-Process
- 使用串口调试助手做为上位机来做收发，调试助手字符串输入数字和字符，按发送按钮，然后观察接受窗口的变化。-Use as a PC serial debugging assistant to do the transceiver, debugging assistant numeric and character string input, press the Send button, and then observe the acceptance window changes.
chaoshengboceju
- 超声波模块测距，通过串口输出测量数据，经实测一米内误差一厘米左右，能满足要求。-Ultrasonic Ranging Module through the serial output measurement data, measured one meter within the error of about one centimeter, can meet the requirements.
hongwaifahongshuju
- 原来用作电子设计大赛的程序，红外发送数据，和家电遥控器的协议一样，可做红外遥控实验。-The original procedures for Electronic Design Contest, infrared transmission data, and home appliances remote control protocols, do infrared remote experiments.
chuankoufasongshiyan
- c51串口发射试验，可以借用来发送你自己项目里的数据，熟悉串口通信。-c51 serial firing test, you can borrow to send the data in your own projects, familiar with serial communication.
chuankoujieshoushiyan
- 串口接收实验，简单的接受函数，即可新手用来做串口通信实验，有课添加进自己工程里面。-Serial receiver experiment, a simple acceptance function can be used to do serial communication experiment novice, there are lessons to add into their works inside.
OTM8009A_BOE4.3_MIPI_mode_20120423
- LCD 驱动代码 tft lcd驱动code。-LCD Driver code
93xxx-c51
- 93xxxEERom C51的驱动程序，比较简单的东西，希望对初学者有用-93xxxEERom C51 Driver