资源列表
TW8816-LCD-Flat-Panel-control-system
- 利用Winbond 78E62BP单片机控制视频转换芯片TW8816，实现CVBS、S-Video等信号在LCD屏上的显示。-Using Winbond 78E62BP microcontroller control video conversion chip TW8816, achieve CVBS, S-Video and other signals display on the LCD .
pailian
- 实现线输出某个信号，等待检测外部对应的输入信号后，再输出一个确认信号-Achieve an output signal line, waiting outside the corresponding input signal detection, and then outputs an acknowledge signal
Driver
- MAX186芯片初始化 PIC16F877A 内部AD初始化-MAX186 init
liushuideng
- 延时程序、流水灯程序。在需要用到的时候，可以直接加入到大的程序段中-Delay procedures, water lights. The need to use, they can be added directly to a large block
MPU5060
- 通过IIC和MPU6050通讯（非硬件）-Communication via IIC and MPU6050 (non-hardware)
shumaguan
- 数码管按键显示程序 通过单片机实现 其中包括截图-Digital tube display program keys, including through the MCU Screenshot
stc89-watchdog-timer
- STC89系列单片机的看门狗应用，定时器定时中断里喂狗-STC89 Series MCU application watchdog timer timer interrupt in DOG
STM32_1DMA_rcvDEMO
- stm32DMA接收，基于奋斗的USART1的中断接收，做了下修改，在火牛的板子上，测试了下，可以接收，做用法调试用-stm32 usart1 dma rcv
yejing
- 12232液晶屏源程序，本程序为北京青云生产的12232液晶屏-yejing ping yuan cheng xu，keyitihuan beijing qingyun danpianji
89c51-virtual-serial-port
- 对于没有硬件的朋友们要以纯软件来仿真串口通信的解决方案，编译通过，可直接运行 -The solution for, no hardware friends to YISHION software to simulate serial communication through the compiler, can be directly run
ENC28J60-stm32-uip
- stm32 uip 实现 ENC28J60 spi-stm32 uip ENC28J60 spi
MPU6000
- 利用SPI总线读取MPU6000的值，传感器数据准备好后产生外部中断进而触发STM32去读取-The SPI bus read MPU6000 value, the sensor data is ready and then generate an external interrupt trigger STM32 to read