资源列表
TLC549
- tlc549模数转换程序，对引脚的定义和时序的控制-tlc549 analog-digital conversion process, the definition of the pin and timing control
time
- mcu-51单片机定时中断程序和扫描数码管时间显示功能-mcu-51 microcontroller timer interrupt program and scan digital time display
1602yejing
- 1602液晶显示器操作和51单片机程序。实现数据的显示操作-1602 LCD operation and 51 procedures. Data display operation
i2c
- PIC16F877A对AT24C02读写代码，实现延时、初始化、写和读操作-PIC16F877A on AT24C02 write code to achieve delay, initialization, write and read operations
pic16f886
- pic16f886采用AD作为按键输入，可以很好的减少单片机的引脚使用，更大限度的利用io资源-pic16f886 using AD as a key input, can be very good to reduce the microcontroller pins, a greater level of resource utilization io
Tower-type
- 水塔模拟：低水位送水，达到低位仍然加水，达到高位停止。若高位为1，低位为0，报错。-Tower Simulation: low water and bottled water is still low, add water to achieve, achieve high stop. If the high is 1, the low is 0, error.
Ultrasonic-Ranging
- 超声波测距：根据距离显示不同数值，精确度0.3mm，可测2cm到4M-Ultrasonic Ranging: display different values depending on the distance, the accuracy of 0.3mm, can be measured 2cm to 4M
PWMtim2PFM
- 产生一个占空比为50 的脉冲PWM波形，要求这个脉冲波形按照以下要求对脉冲频率进行变化： 从500KHz（对应2us周期）到10KHz（对应100us周期)每个脉冲周期时间递增，每次递增1us。当脉冲周期时间递增到100us时，下一个脉冲周期为2us。如此循环-From 500 KHZ (corresponding to 2 us cycle) to 10 KHZ (100 us cycle) corresponding to each pulse cycle time increasing
LCD1602
- 本程序提供了在STC90单片机上的系统电压值、温度、光照强度等通过AD转换显示在LCD1602或LED数码管上。-This program provides the STC90 MCU system voltage, temperature, light intensity through AD conversion LCD1602 display or LED digital tube.
DIJI
- 本程序提供了在STC90单片机上的系统电压值、温度、光照强度等通过AD转换显示在LCD1602或LED数码管上。-This program provides the STC90 MCU system voltage, temperature, light intensity through AD conversion LCD1602 display or LED digital tube.
SIXIANDIJI
- 本程序提供了在STC90单片机上的系统电压值、温度、光照强度等通过AD转换显示在LCD1602或LED数码管上。-This program provides the STC90 MCU system voltage, temperature, light intensity through AD conversion LCD1602 display or LED digital tube.
stm32paomadeng
- 本程序提供了在STC90单片机上的系统电压值、温度、光照强度等通过AD转换显示在LCD1602或LED数码管上。-This program provides the STC90 MCU system voltage, temperature, light intensity through AD conversion LCD1602 display or LED digital tube.