资源列表
e-jewel
- embedded c used in switching camera attached to micro controller and change accordgly
1602
- 基于ds18b20的温度显示，显示模块是1602液晶，带有时钟芯片，键盘可调节时间。-Based ds18b20 temperature display, liquid crystal display module is 1602, with a clock chip, the keyboard can be adjusted time.
CH375-51
- 内置固件模式的ch375的程序框架，实测过用的是stc15F2K60s2-Framework built-in firmware mode ch375
The-taxi-meter
- 出租车计价器程序,出租车计价器电路图都有，可以-The taxi meter
SOURCE-CODE
- 一款IC卡售饭机的原程序，本IC卡使用的是4442卡，有这方面兴趣的可借鉴。另外原理图在另外一个上传文件里。-An IC card, meal vending machine of the original program, the IC card is 4442 card, the interest in this area can be used for reference. The schematic in another file.
wire-cutting-control
- 基于PID线切割控制部分设计,应用PID对对线切割机控制-Based wire cutting control part of the design
NEW-IAP
- STM32实现IAP固件升级的引导程序-Upgrade to achieve STM32 IAP
stm32_OV7620
- stm32驱动OV7620摄像头，在上位机中显示摄像头数据图像-THE CORE IS USED FOR CAMMERA OF STM32
time_display_unit_circuit
- 纪念日数显装置电路，用来实现纪念日倒计时数字钟-Memorial day display unit circuit
STM32-uart
- stm32串口程序配置与通信代码，使用keil4.2以上版本调试-stm32 serial configuration and communication code, debugging using keil4.2 above
stm32_measure_distance
- stm32控制超声波精确快速测距，误差在0.1cm，通过LCD显示测量值-STM32 control ultrasonic quick and accurate location, the error in 0.1cm, as revealed by LCD measurements
STM32-AD-lib
- stm32 模拟信号装换位数字信号程序，使用keil4.2以上版本打开-stm32 analog signal digital signal conversion equipment, the use of keil4.2 or later to open