资源列表
P1_1
- P1口作输出口，接八只发光二极管，编写程序，使发光二极管循环点亮。P1.0，P1.1作为输入口接两个拨动开关，P1.2，P1.3作输出口接两个发光二极管，编写程序读取开关状态，将此状态在发光二极管上显示出来。-P1 port as an output port, then eight light-emitting diodes, programming, making light-emitting diode light cycle. P1.0, P1.1 as an input port co
cpu
- 用CPU内部定时器方式计时，实现每秒钟输出状态发生一次翻转。-CPU internal timer mode with timing to achieve the output state occurs once every second flip.
INTERMIT1
- 用单次脉冲申请中断，在中断处理程序中对输出信号进行翻转。-Applications with a single pulse interrupt, the interrupt handler flip the output signal.
PWM
- 基于飞思卡尔XS128的 PWM模块设定输出！-The PWM module based on Freescale s XS128 set the output!
ir_decode_C51
- 红外遥控,用数码管显示遥控值,使用ME500开发板-Infrared remote control, remote control value with digital display, use ME500 development board
DS1302PLCD1602-C51
- DS1302实时时钟显示与定时控制,使用LCD1602显示,使用ME500开发板-DS1302 real time clock display and timer control, using LCD1602 display, using the ME500 development board
DS18B20-LCD1602-C51
- DS18B20温度控制,使用LCD1602显示,ME500开发板-DS18B20 temperature control, using LCD1602 display, ME500 development board
w1010
- 数码管显示电子钟的C51源代码,使用ME500开发板-Digital display clock, ME500 development board
shumaguan
- 基于51单片机的基本计算器，实现基本四则运算-51 single basic calculator
Fasong
- 1. 程序下载到2个开发板 然后按KEY(左下角第一个按钮)后发送信息，发送完毕后蜂鸣器响一下，对方受到信息后同样 响一下。而且两个开发板都可以做为发送和接收，一个做为发送，对应另一即为接收,实现及时双向通信。-1 The program is downloaded to the development board and press 2 KEY (lower left corner of the first button) after sending the message, sent a
program
- 用于家庭的漏电保护的微机综合保护装置,范围宽,灵敏度可以调节-Microcomputer leakage protection for the family of integrated protection devices, wide range, sensitivity can be adjusted
AT45DB161D_SPI
- AT45DB321D驱动程序,包括读写数据命令函数、初始化芯片函数等必备的驱动程序-AT45DB321D driver