资源列表
ADC_UART
- 基于ok6410卡发板的，ADC转换器测试程序，通过串口将转换结果输出。-Based ok6410 card issued board, ADC converter testing procedures, the conversion result is output through the serial port.
ds18b20
- 基于ok6410开发板的，DS18B20温度传感器的裸机测试程序。传感器要插在DS1口上。-Based ok6410 development board, DS18B20 temperature sensor bare metal test program. Sensors to be inserted in the DS1 port.
KeyLed_IRQ
- 基于ok6410开发板的，按键控制LED灯的裸机测试程序，控制方式为按键触发外部中断。按键为S2。-Based ok6410 development board, button control LED lights bare metal test program, the control mode is the key to trigger an external interrupt. Button for S2.
Key_Led
- 基于ok6410开发板的，按键控制LED灯的裸机测试程序，控制方式为按键直接控制LED灯，不采用中断控制方式。按键为S2。-Based ok6410 development board, button control LED lights bare metal test program, the control mode for direct control button LED lights, do not use the interrupt control mode. Button for
TM1638testC51
- stc89c52通过tm1638控制8个数码管，8个LED，8个按键。-STC89C52 by TM1638 control 8 digital tube, 8 LED, 8 位 button.
time0
- 基于ok6410开发板的，定时器0的裸机测试程序。采用定时器0中断的方式，会触发LED和蜂鸣器报警功能。-Based ok6410 development board, Timer 0 bare metal test program. Using the timer 0 interrupt mode, will trigger LED and buzzer alarm.
UART-DMA
- STM32的UART发送、接收DMA模式函数配置方法，已经调试可用。-Configuration method of STM32 UART using DMA mode to realize duplex communication function, debugging has been available.
74HC595
- 两片联级的74HC595动态扫描8位数码管-Two cascade of 74HC595 digital tube dynamic scanning 8
TM1639
- PIC单片机通过专用集成芯片TM1639驱动8位数码管-Specific integrated chip TM1639 drive eight digital tube
GPS
- 包含GPS,TDC,SPI,UART等模块-Includes GPS, TDC, SPI, UART
cc1020
- 这是msp430和cc1020的源代码，写的很详细，拿来用即可。-This is the source code, msp430 and cc1020 write very detailed, use them.
jiaotongdeng
- 交通灯,包括C语言源代码!用Keil C51编程。-Self-made single chip odometer, including the C language source code! Programming using Keil C51. 文件列-Traffic lights, including the C language source code! Using Keil C51 programming.-Self-Made single chip odometer, includin