资源列表
sd2203a
- sd2203a C8051F120 时钟单片机程序-sd2203a C8051F120
sim300
- C8051F120 控制SIM300短信模块程序-SIM300 C8051F120 MCU
Schematic-for-BLCD
- #63 直流无刷电机控制板及驱动板电路图，是我在某外企所做的一个直流无刷电机项目，采用的TI的方案，现共享出来换积分-this is a BLCD schematic,we used the TI s solution , so I share it .
BLDC-firmware
- 三相六拍直流无刷电机驱动固件，采用的TI的方案，已经用在我们公司的无刷圆锯上面了。特共享出来换积分-This is the driver for BLDC motor ,this firmware has been used on our BLDC product.
Sprinter-master
- 国外开源3D打印机Sprint 的 固件，希望对大家的设计有所帮助，其中的 喷头加热的PID程序，G代码解析程序绝对是非常的有用的。-this is a open source 3D printer s firmware ,it is very useful to design your our 3D printer.
RTC
- 3d 打印机上的 RTC模块驱动程序，可以实时显示打印时间。STM32平台上编写-this is a 3D printer driver for RTC module, it can display the time which the machine has print.
Project_1
- 基于cc2431无线射频芯片的源码。主要实现的功能是作为卫星网络的一个节点，通过连在自身的DS18B20温度传感器，将所采集到的温度数据进行处理然后发回到主机，并实现传感器节点的定位。-Cc2431 RF chip based source. Main function is as a satellite network nodes, connected by their DS18B20 temperature sensors, temperature data collected to be
LED-Lights
- 经典单片机led灯程序大全，包括asm和c语言以及相关排线和电路图。-Daquan classic SCM program led lights, including asm and c language and associated cables and circuit diagrams.
STN_KTH_RFID
- 源代码，可直接实用，RC522绝对真实，开发有效-rc522 source
mcus-recieve-and-send
- 该程序包含了 时钟的显示,通过上位机可以调整下位机的时钟.-The program includes a clock display, the PC can be adjusted by the next crew of the clock.
motor_controlling_based_on_ARM
- 该程序是基于ARM的电机控制程序，可以通过串口和中断方式控制-The program is based on ARM s motor control program that can be controlled through the serial port and interrupt
DHT11
- 单片机编程传感器dht11，可用于测量温度和湿度。-Microcontroller programming sensor DHT11, can be used for measuring temperature and humidity.