资源列表
DAINJI
- STM32电机控制，根据不同的电压等级分为四级调速来进行控制-STM32 motor control, depending on the voltage level is divided into four speed to control
app
- 实现流水灯以三种流动方式和四种流动速度的不同组合而进行点亮 流动 -Achieve water lights in three different combinations of the four flow pattern and flow velocity and lighting up floating
app
- 蜂鸣器音乐程序，P1.0口输出各音调的频率方波-Buzzer music program, P1.0 port output frequency of each pitch square wave
VIEWTECH_SDW
- 中显液晶屏驱动 中显液晶屏驱动 中显液晶屏驱动 中显液晶屏驱动 中显液晶屏驱动 -hello worldhello worldhello worldhello worldhello worldhello worldhello worldhello worldhello worldhello worldhello worldhello worldhello world
12864wenduceliang
- 基于51单片机控制的 18b20测量温度 12864显示测量结果-51 based on the measured temperature 18b20 12864 microprocessor controlled display of measurement results
PCF8591
- PCF8591是8bit的A/D和D/A芯片，采用i2c接口，它有四路模拟输入口和一个模拟输出口，采样速率取决于i2c的速率。数据传输是高位在前低位在后（不论是主机写入数据，还是主机读取的数据）。-PCF8591 is the 8bit A/D and D/A chip, using i2c interface, which has four analog inputs and one analog output sampling rate depends on the rate of i2c.
GSM-SYSTEM
- STC89C52的GSM智能家居报警系统资料附源程序-STC89C52 of GSM smart home alarm system data with source code
exercise
- 使用c8051f120外部晶振22.1184MHz,时钟频率设置为28MHz,文件分transmit和receive两部分,无线传输模块使用nrf24l01+-use C8051F120,external oscillator 22.1184MHz,clock frequency 28MHz,the file includes transmit and receive,radio module use chip nrf24l01+
STM32_BMP085_PRJ
- 硬件环境STM32F103,功能:通过NRF24L01发送L3G4200D的状态信息-Hardware environment STM32F103,function: status information is sent via NRF24L01 L3G4200D
sample-and-transmit
- PIC控制AD9833源代码，并通过串口发送ADC采样数据，DDS由PIC控制，通信方式为SPI-PIC source code control AD9833 and ADC sampling data sent through the serial port, DDS controlled by the PIC, the communication system is SPI
LED
- 本程序提供两种点亮LED的方法，希望对单片机初学者有用处-This programme is for a new learner
LED-flicker
- 这同样关于LED的，希望对初学者有用，谢谢大家的支持。-this programme is for a ner learner