资源列表
musgg123
- 一共4个按键：确认/修改，移位，时间加，时间减 LCD1602界面说明：第一行为系统当前运行状态(两种)： Runing-表示运行中不能设置任何参数 Timing-表示进入时间校时状态 第二行未当前时间显示与设置； 通过配合移位按键对应的时-分-秒进行闪烁指示， 再配合时间加/时间减进行参数校时； -A total of four buttons: confirm/modify, shift, time plus, time min
SD
- 51单片机进行SD卡读写程序。程序经过验证，能直接使用。-51 MCU SD card reader program. Procedures after verification, can directly use.
c51mcu123
- 交通设定倒计时范围：99-20S 倒数至5S后黄灯闪烁 按键配合设置参数值-Transportation set Countdown range: 99-20S countdown 5S button with yellow light flashes after setting a parameter value
lpc2106mcu123
- 1.优先级7如此类推 2.有呼叫按键按下，扬声器提醒1S关闭 3.按下复位键所有数据初始化-1. Priority 7 and so on 2. call button is pressed, the speaker reminded 1S Close 3. Press the reset button to initialize all data
STM32F103Rx_SD
- 基于STM32f103RX的SD卡读取数据。程序经过验证，能直接使用。-Read data the SD card based on STM32f103RX. Procedures after verification, can directly use.
STM32F103Rx_SD
- 用STM32F103Rx进行SD卡图片播放，经过试验，能直接使用。-Using STM32F103Rx SD card picture playback, after testing, can directly use.
STM32f103
- 用ARM内核STM32f103，无线控制电机转动。程序经过验证，能够稳定运行。-With ARM kernel STM32f103, wireless control motor rotation. Program after verification, to stable operation.
Atmega8
- 基于Atmega8单片机和c1101无线模块进行无线通信，实验稳定。-Based on Atmega8 microcontroller and c1101 wireless module for wireless communications, experimental stability.
RTC
- ALIENTEK MINISTM32 实验11 RTC实时时钟实验-ALIENTEK MINISTM32 experiment 11 RTC real time clock experiment
paomadeng
- ALIENTEK MINISTM32 实验1 跑马灯-ALIENTEK MINISTM32 Experiment 1 marquees
KEY
- ALIENTEK MINISTM32 实验2 按键输入-ALIENTEK MINISTM32 Experiment 2 key input
ADC
- ALIENTEK MINISTM32 实验13 ADC实验-ALIENTEK MINISTM32 experiment 13 ADC test