资源列表
MSP430-source-code
- IAR And energia MUP 6050 FOR TI MSP430G2553 -IAR And energia MUP 6050 FOR TI MSP430G2553
dsPIC33F_ABAUD_V1.0.0
- UART 接收引脚 （ RX 引脚）上的信号能在内部传送至一个输入捕捉模块以获得输入信号边沿的时序。根据该时序，应用程序能正确设置UART 的波特率。-The signal on the UART receive pin (RX pin) can be internally routed to an Input Capture module to time the edges of the incoming signal. From that timing the software can se
TrackingCar
- 基于arduino平台实现的自动循迹小车，使用三路传感器，能够实现十字路口的识别功能-Arduino platform based automatic tracking car, using a three-channel sensor, to achieve recognition crossroads
rover
- 该代码实现了基于arduino平台的月球车原理样机，功能包括前进后退左转右转以及摄像头太阳能电池板的打开闭合等-This code implements the lunar rover prototype based on arduino platform features include forward and back as well as the camera Zuozhuanyouzhuan solar panels opened and closed, etc.
self-balancing_car
- 此代码实现的是基于arduino的自平衡功能，样机模型为一双轮小车，使用两路电机驱动前进后退，使用加速度传感器实现平衡控制-This code is based on the self-balancing function arduino prototype model of a two-wheeled car, using two-way motor drive forward and back, using an acceleration sensor to achieve a balanc
robot_6f2f
- 此代码实现的是一款自动行走机器人的控制，机器人模型使用6路舵机模拟人的下半身，实现了流畅的前进功能-This code is an automatic control of the walking robot, the robot model with six-way servo simulate human lower body, to achieve a smooth forward function
code
- 基于51的RC522读写卡程序(Keil V5编写)
OSD.MAX7456-MSP430F5529
- 2015电设全国赛G题，MSP430F5529单片机控制MAX7456字符叠加芯片，CCS6.0环境，字符位置可调-MSP430F5529 control MAX7456, caption chip, OSD
testAD9854.SPI
- MSP430F5529单片机控制AD9854，SPI通信模式，DDS芯片，数字扫频信号源-MSP430F5529 control AD9854, SPI communication mode,dds
PICPATT7022
- ATT7022E和单片机PIC30实现电能计量，精度较高，可以参考-ATT7022E and MCU PIC30F
134_normal
- 采用HT48R01+DM134设计的16路LED流星灯方案。-HT48R01+ DM134 design using 16 LED meteor light scheme.
134_switch
- 采用HT48R01+DM134设计的16路LED流星灯方案。（脚位交叉）-HT48R01+ DM134 design using 16 LED meteor light scheme. (Pin cross)