资源列表
test.asm
- Generic ASM code taken Lexotan-Generic ASM code taken Lexotan
MSP430FX-example-code
- MSP430系列固件例程,对想深入了解430系列单片机的开发人员有帮助-MSP430 series firmware routines, to want to have a thorough understanding of 430 series single chip developers have help
stm32f1xx_iap
- stm32f1xx的在线编程程序,通过超级终端在线更新单片机的主程序.-
mcu
- 51单片机学习素材，包括定时器，数模转换等几十种素材。-51 MCU learning materials, including timers, digital to analog conversion, etc. dozens of creative.
HX711for51MCU
- C51单片机驱动HX711称重传感ADC的代码，已经验证通过-C51 Microprocessor HX711 weighing sensor ADC code has been verified by
dianpingceshi
- 设计一个高低电平信号的测试电路，功能如下： 1． 测量范围：低电平UL<0.5V ，高电平>5V 。 2． 用高音表示被测信号为高电平。 3． 用低音表示被测信号为低电平。 4． 当被测信号在0.5V～5V之间时，不发出音响。 -Design a test circuit high and low signal, the following functions: 1. Measuring range: low UL <0.5V, high level&g
ksz8041-107_--LWIP_TCP--server
- MDK编译 stm32f107 TCP服务器程序 PHY:KSZ8041-STM32F107 TCP SERVER
FM25L256
- FRAM25L256铁电存储器的驱动程序，包括读写8bit，16bit，32bit等函数，供外部调用。-FM25L256 ferroelectric memory drivers, including reading and writing 8bit, 16bit, 32bit and other functions for external calls.
MX25L256
- mx25L256串行SPI FLASH的驱动文件，包括连续读写操作，擦除块，擦除扇区，擦除整块等操作。-mx25L256 serial SPI FLASH drivers, including continuous read and write operations, erase block, erase sector, erase block other operations.
kalman
- 卡尔曼滤波程序的单片机代码实现方案，需要自己配置参数进行效果调试。-Kalman filtering program microcontroller code program, you need to configure the effect parameters themselves debugging.
userlib
- 单片机C常用功能函数。包括ASCII、BIN、HEX、BCD等相互转换，四舍五入除法等功能。-Microcontroller C functions commonly used functions. Including ASCII, BIN, HEX, BCD etc. conversion, rounding division, and other functions.
RTC2103
- RTC实时时钟芯片2103的驱动相关程序，包括读写时间、日期操作，读取的格式转换等操作函数。-RTC real time clock chip 2103 driver related procedures, including reading and writing time, date, reading the format conversion and other operations functions.