资源列表
CODE3.tar
- 电子称的仿真设计,用的是8051单片机,包括源代码和DSN实现-Electronic simulation design, using a 8051 microcontroller, including the source code and DSN implementation
v4
- 可以实现点阵时钟显示，显示年月日 时间，温度，闹钟功能。-It can achieve lattice clock display, date display time, temperature, alarm clock function.
444-LED
- 基于80C51单片机的一款4X4X4光立方代码，不需要外置驱动电路，但需要自己搭建由4个横向，纵向，竖向的LED灯组合而成的立方阵列，需要硬件支持才能做出-80C51 microcontroller based on a light cube 4X4X4 code, does not need an external drive circuit, but by the need to build their own four horizontal, vertical, vertical LED
DB1_001_KEIL4
- DuYang DB1-001 炫彩LED小夜灯-DuYang DB1-001 LED lamp
VC_H264
- VC H264 Decode 开源程序,从ffmpeg移植过来,全部dll库替换成源代码.-VC H264 Decode open source migrate FFMPEG all dll lib were remove and replace by c code.
HaiSi_H264
- haisi h264解码程序,内嵌说明文档,很容易上首,解码速度比较快-Haisi H274 Decode source code for vc with spec, fast speed, easy to use.
1.1.1
- 基于STM32的GPIO相互连接，实现设备之间的相互通信-Connected to each other based on the STM32 GPIO, communicate with each other between devices
CT107D
- 用于CT107D开发板的例程与原理图、说明书，其中包含温度、显示、按键等典型模块的例程，已编译通过。-CT107D for routine development board and schematics, manuals, which includes temperature, display, buttons and other typical routine modules, compiled by.
STM8-from-entry-to-masterV1.0
- STM8 entry to masterV1.0-STM8 entry to masterV1.0********************
Candle
- 使用Feeling单片机开发的红外遥控控制的七彩渐变和跳变的程序- 使用Feeling单片机开发的红外遥控控制的七彩渐变和跳变的程序 使用Feeling单片机开发的红外遥控控制的七彩渐变和跳变的程序 Using Feeling microcontroller development of the infrared remote control of the colorful gradient and jump procedures
Arduino LCD Library
- use a screen on your robot
mainbluetooth
- 通过手机蓝牙遥控智能小车，小车要用蓝牙模块-Through the mobile phone Bluetooth remote control smart car, the car to use Bluetooth module