资源列表
yimaqi
- 使用C51控制LED来显示译码器的输出值-Using C51 to control LED to display the output value of the decoder
jiaotongdeng
- 使用C51来实现交通灯信号的模拟，由红黄绿三种颜色的LED模拟交通灯，时间由数码管显-The use of C51 to achieve the simulation of traffic lights, traffic lights by the three colors red yellow and green LED simulation time by the digital tube display
wendu
- 使用C51通过单片机开发板上的温度传感器来使数码管显示温度-Using C51 microcontroller development board through the temperature sensor to make digital tube display temperature
shizhong
- 使用C51实现实时时钟DS1302即数码管显示时钟-Using C51 to achieve real-time clock DS1302, digital tube display clock
123
- 基于52单片机的超声波测距，有详细代码和仿真图。-52 microcontroller based ultrasonic distance measurement, simulation code and a detailed map.
51Modbus
- 学习51单片机实现Modbus从机程序，内部有注释，其他MCU可稍加更改就可拷贝-Study of 51 singlechip microcomputer Modbus machine program, internal comments, other MCU is a little change can be copied
Modbus-RTU-host-application
- Modbus RTU 模式，MCU做主机串口发送数据，使用C51编写，使用KEIL打开即可调试-Modbus RTU mode, the MCU to do the host a serial port to send data and the use of C51 written, use KEIL open can debug
Test
- C51简易计算器，加减乘除的基本功能，附带DSN图-C51 simple calculator, the basic functions of addition, subtraction, with DSN FIG.
1-keil-c-
- keil 快速入门学习资料，可以帮助初学者学习-keil learning
w25q64
- stm32f4代码之w25q64驱动，spi普通读写及spi dma读写。spi普通读采用寄存器操作方式以及nop延时能够达到最大传输速率。-w25q64 stm32f4 code for the driver, spi and spi dma ordinary reader to read and write. spi register using ordinary read operation and nop delay to reach the maximum transfer rate.
74hc595
- 74hc595 8位串行数码管 测试芯片 STC89C52 DIO接 P1.0 RCK接P1.1 SCK接P1.2 上电 数码管会显示时钟 -8 bit serial digital tube
STCIAP15timer1_interrupt
- 泥人STCIAP15核心板－STC15定时器中断-stc15 timer 1 interrupt