资源列表
lwxc1
- 基于51单片机，可以通过红外线驱动步进电机进行20档变速，正反旋转，可以进行多种设计。-based on c51,which can be used to the machine to change the speed
stm8hardwareIIC
- 使用stm8的硬件IIC读写时钟Pcf8563-Use stm8 hardware IIC reading clock Pcf8563
TCS230
- 颜色传感器TCS230的51单片机程序源码。-TCS230 color sensor 51 SCM program source code.
RC522-by-lcd
- rc522 串口显示 液晶显示-rc522 use chuangkou
miehuo
- 灭火小车 机器人-use miehuo car
maikuan1
- MSP430利用定时器A的捕获功能测量脉宽，并用1602显示-MSP430 using the timer A capture pulse width measurement function, display with 1602
fangbo
- MSP430f149P1.0 P1.1 P1.2 P1.3四路方波 周期可调-MSP430f149P1.0 P1.1 P1.2 P1.3 four adjustable square wave cycle
4KEY_1602
- MSP430f149 利用1602 液晶显示 4 位独立按键键值 -MSP430f149 using the 1602 LCD four independent key key
ADC_IN0_1602
- MSP430 ADC0通道采集电压并显示到1602显示屏上 ADC 输入为 P60 管脚-MSP430 ADC0 voltage acquisition channels and displayed on the display screen 1602 ADC input pins P60
c51-clock
- c51单片机数码管闹钟程序，可定时调时，四按键，无时钟芯片，有蜂鸣器-c51 microcontroller digital clock program, the timing can be adjusted when, four buttons, no clock chip, there is a buzzer
ADC1
- 实现ADC采样芯片外的模拟电压，通过LCD显示，并通过串口发送到PC机。-Analog voltage sampling ADC chip through LCD display and sent to the PC via the serial port.
key
- 按键测试程序，按下S1-S4，在LCD上分别显示1-4.-Key test program, press S1-S4, respectively, is displayed on the LCD 1-4.