资源列表
RS232-host-send
- rs232 host send application
IAR7.xpojie
- IAR7.x破解文件.rar IAR7.x破解文件.rar-IAR7.x all
LCD1602_dispaly_temp
- 1602显示温度,51单片机控制ds18b20显示温度，可设置报警温度。-1602 according to temperature, 51 single chip microcomputer
C51
- 使用RC522读取非接触卡数据，并通过接口与单片机通讯。使用c51作为主控芯片，已经调通。-Use RC522 to read non-contact card data, and through the interface with the microcontroller communication. Use c51 as the master chip, has been transferred.
MPU9250
- 基于stm32的mpu9250程序，通过串口通信数据-Based on stm32 mpu9250 procedures, through the serial communication data
STM8-TIM1-TI1
- 如何配置使用STM8单片机的外部时钟模式1，对TIM1_CH1通道的外部时钟上升沿计数，每来一个上升沿时钟，计数器时基加1-How to configure the use of STM8 microcontroller external clock mode 1, the TIM1_CH1 channel external clock rising edge count, each to a rising edge of the clock, the counter time base plu
STM8-TIM1-RCR
- 如何使用STM8单片机的重复计数器，使其产生更新事件，和产生定时器跟新中断事件-How to use the STM8 single-chip repeat counter to generate an update event, and generate a timer with a new interrupt event
sii9135
- SII9135的开发代码，用来帮助开发SII9135的朋友-SII9135 development code, used to help develop friends SII9135
BUTTON_BEEP
- 如何使用STM8103的按键外部中断，当按下按键的时候，蜂鸣器发出固定频率的声响-How to use the STM8103 key external interrupt, when you press the button when the buzzer issued a fixed frequency of sound
BUTTON_LED
- 如何使用STM8S103的外部中断，其中一个按键使用低电平检测，产生IO中断，来点亮一个LED灯-How to use the STM8S103 external interrupt, one of the keys to use low detection, generate IO interrupt, to light a LED light
labview-to-avr
- 实物调试：labview控制avr单片机下位机程序，接收上位机命令，进行串口测试，数码管显示的修改，I/0口的读取与写入。-Physical debugging: labview control avr microcontroller program under a machine, command, receive the upper machine serial tests, the changes of digital tube display, read and write I/0 in
canloopback
- STM32 CAN环回模式通讯测试代码,实际应用时只要稍加改动即可应用为普通收发模式-STM32 CAN Communication code in loopback mode,can be used after modification.