资源列表
pic_program
- PIC16F87X系列单片机串口通信，串口初始化配置，LCD1602初始化程序(PIC16F87X series singlechip serial communication, serial initialization configuration)
PWM电机 - 副本
- 驱动直流电机，通过l298n来驱动，stm32板拉高引脚PA9与PA10，同时PA7输出PWM值(The drive DC motor is driven by L298N, the STM32 board pulls the high pin PA9 and the PA10, and the PA7 outputs the PWM value)
Si7021-A20
- 该文档为温湿度传感器芯片SI7021-A20的数据手册。(Temperature and humidity sensor chip SI7021-A20 data manual.)
基于C8051F410设计的热敏电阻测温装置
- 基于C8051F410设计的热敏电阻测温装置(Thermistor temperature measuring device based on C8051F410 design)
实验27：AD模数转换
- 基于51单片机的红外通信控制程序通过按键可以实现红外通信(infrared communication)
STM32工程模块
- enc28j60 uip协议，实现服务器、客户端局域网通信。()
数字定时器
- 0-99分倒计时，可以设定初始时间，，在c8051f410板上开发(0-99 minutes countdown, you can set the initial time, developed on the C8051F410 board)
STM32F103_ADCS_DMA
- STM32F103多路ADC（DMA）温度采集。()
实验29：LCD1602液晶
- 基于51单片机控制lcd1602液晶显示程序 通过单片机与液晶连接实现单片机的端口对液晶的控制(Based on 51 single-chip microcomputer control LCD1602 LCD program Through single-chip microcomputer and liquid crystal connection, the MCU port to control the liquid crystal)
实验30：LCD12864液晶
- 基于51单片机的lcd液晶显示程序 通过将单片机与液晶连接实现单片机控制液晶显示想要显示的东西(LCD based on 51 single-chip LCD program By connecting the MCU with the LCD, the MCU controls the LCD display)
【实验7】ADC
- ADC 转换的小例子。单通道。在Keil环境下编译。(A small example of ADC conversion. Single channel.)
【实验2】UART
- LPC1768单片机的UART功能调试。通过串口可观看结果。(LPC1768 microcontroller UART function debugging. View results through the serial port.)