资源列表
FT232_CBUS_source
- FT232_CBUS_source code
inputtest
- 本实验利用TIM5_CH1来做输入捕获，我们将捕获PA0上的高电平脉宽，并将脉宽时间通过串口打印出来，大家可以通过按WK_UP按键，模拟输入高电平。同时，本实验将保留上一个实验的PWM输出，DS0还是会由暗-->亮的循环变化，大家可以通过杜邦线连接PA0和PB5，来观测PWM输出的高电平时间。(This experiment uses TIM5_CH1 to do input capture, we will capture the PA0 high level pulse width,
IR_RS232
- 红外遥控代码,需要重新配置SysTick的中断优先级为最高，要不然SysTick延时中断抢占不了IO EXTI中断,或者当你用其他定时器做延时的时候，要配置定时器的优先级高于IO EXTI中断的优先级.(Reconfiguration of SysTick interrupts the highest priority, otherwise SysTick delay interrupts cannot preempt IO EXTI interrupts * because the defa
Mega16_1KHz测频程序
- 使用Mega16单片机实现对1kHz信号频率的测量(program to measure the frequency about 1kHz using Mega 16 MCU)
TCS230模块3
- TCS230颜色识别模块程序，可以识别各种颜色，通过RGB三种比例的判断便可得出对应的颜色。(TCS230 color recognition module program)
DS18B20_Program
- 单片机atmega16读取温度芯片ds18b20数据，并通过串口发送到上位机显示。(MCU atmega16 reads the ds18b20 which senses the temperature. and the data is sent the PC through SCI.)
pov显示图片
- 当电机有一定转速转动时能显示图片在一个二维平面(When the motor rotates, it can display pictures in a two-dimensional plane)
Requested Papers on BCI
- Brain Computer Interface
ScienceDirect_articles_15Aug2017_22-58-01.963
- coding for feature selection
LPC2_CAN
- EL mismo ejemplo otra bversion
Cuk_Converter
- s a signal builder used as the reference speed time graph of the motor,three signals are there.the second signal is used for optimization purpose.if you want to change the reference signal for optimization then you have to change the costfunction als
SerialCommand
- 一种非常实用的arduino 串口通信库，拿来与大家一起分享 希望跟大家一起交流讨论(serialCommand A very practical arduino serial communication library to share with you I hope to discuss with you)