资源列表
STM32F103RCT6
- STM32从串口读出温度数据，再通过UDP或GPRS上传服务器-STM32 temperature data read from the serial port, and then upload server via UDP or GPRS
jidianqi
- 程序是用stm32输出来的信号来控制继电器的开通与否，继而来控制电机的状态-Program is with stm32 output signal to control the opening of relay or not, and then to control the state of the motor
ads1259
- ads1259的驱动代码,已经调试通过.可以使用.-the ads1259 s drive code can use.
STM32IrDA
- 这是一份基于stm32的红外发射接收协议代码ird。-This is an infrared communication protocol code.
51buzzer
- 51单片机AT89C52控制蜂鸣器proteus仿真。-
STM32F407---HelixDecodeMP3
- 利用stm32f407来进行软件解码MP3-Use stm32f407 for software decode MP3
ADC
- atxmega ADC 例程， 详细介绍如何初始话AD, 和AD转换，读取转换结果等-atxmega ADC demo
QN8027-document
- 采用51单片机和QN8027芯片编写的FM发送模块，可清晰发送信号，收音机可接受-51 And QN8027 adopt written FM transmitter chip module can send a clear signal, Radio acceptable
RTL8309SB_Layout_Guide_1.1_MKD
- 以太网交换机芯片RTL8309的布局指导-Ethernet switch chip RTL8309 layout guidance
SINEWAVEFORM-1
- 这是一个用stm32F103rct6 DAC模块产生正弦波的函数。其中涉及RCC时钟控制-This is a stm32F103rct6 DAC module generates sine function. Which involves the RCC clock control
DAC-----VOLTAGE----
- STM32单片机的DA模块输出可调电压。适合做0~5v可调电压源-STM32 MCU DA module output adjustable voltage. Suitable for 0 ~ 5v adjustable voltage source
FM25CL64
- STM32 SPI读写FM25CL64铁电存储器，程序为103RBT6单片机读写代码，包括SPI初始化、字节发送接收代码、FM25CL64读写代码-STM32 SPI read/write FM25CL64 ferroelectric memory, the application for 103 rbt6 microcontroller, speaking, reading and writing code, including the SPI initialization code byte