资源列表
suan_fa
- c常用算法，使用在turb c及单片机应用等方面，pdf格式的文档-c commonly used algorithm, the use of the turb c and SCM applications, pdf format documents
mcu51
- 用于单片机键盘扩展,由于单片机的扩展接口少,而采用这种方法 的,8155用于扩展,-SCM keyboard for expansion, the expansion of microcontroller interface small, and the use of this method. 8155 for the expansion,
can_tongxin
- 调试好的can程序（包含汇编及C语言），与大家分享！-good can debug procedures (including compilation and C language), share with you!
nrf401_tongxin
- 单片无线收发芯片nRF401的通信实验程序(C语言源文件)-single-chip wireless transceiver chip nRF401 communications experimental procedure (C language source file)
nrf905_C51demo_Cfile
- 单片射频收发器nRF905,具备跳号跳频和跳址功能.这个是C51的源程序-single-chip RF transceiver nRF905, with dancing, hopping and jumping site function. This is the source of C51
AVR-v_UART
- 在一些应用中，经常要用到双串口，但是一般单片机只提供一个串口，其实完全可以用普通I/O口模拟一个串口。这里介绍一个用AVR单片机模拟的串口程序.-in some applications, the regular use of the dual serial port, but most only provide a microcontroller serial, In fact, the general can use I / O simulation of a serial mouth. H
lcd-key-led
- 这是我学习过程中编写的测试代码，用STD2.51开发环境，C语言编写，以MICETEK EV44B0－II开发板为硬件测试平台，用到串口，液晶，键盘，LED。 液晶包括图片显示、划线、ASCII码显示、4000多常用的汉字库，可以显示任意常用的汉字。 键盘采用中断触发！-This is my learning process to prepare the test code used STD2.51 development environment, C language, MICETEK
T6963_Yejin
- 东芝T6963是一个非常通用的芯片,市面上128*64或240*64的点阵液晶大都使用该芯片驱动,这个文件是该芯片的驱动.-Toshiba T6963 is a very common chip, market 128 or 240 * 64 * 64 dot matrix LCD Most of the use of the chip-driven, This document is the chip-driven.
C8051F020UPDATA
- C8051F020 ，通过串口发送HEX烧写文件，进行在程序编程-C8051F020, through serial burning documents sent HEX, the Programming
c8051spi
- C8051F020：通过SPI接口，进行数据通讯的事例-C8051F020 : SPI interface, data communications examples
c8051FLASH
- C8051F020，对自带FLASH进行擦除，编写的事例-C8051F020, the right to bring their own FLASH for erasure, prepared by the case
dogfun
- 非常实用的看门狗驱动程序，稍加更改即可成为串行数据存储器，使您程序硬加密的理想工具。-very useful watchdog driver, a little change can be used as a serial data memory, your hardware encryption procedures for the ideal tool.