资源列表
ds18b20successful
- 51系列单片机的温度传感器的程序已经试验过准确可行-51 series microcontroller program of the temperature sensor has been tested accurately
0832
- 51单片机，ADC0832的A/D转换代码。ADC0832是8位分辨率、双通道A/D转换芯片。其最高分辨可达256级，可以适应一般的模拟量转换要求。-51 SCM, ADC0832 the A/D conversion code. ADC0832 8-bit resolution, dual-channel A/D converter chip. The maximum resolution of up to 256, can be adapted to the general requirem
ADC0809
- 单片机代码。将实验板中两路模拟电压信号转换成数字量，并以十进制形式显示，前3位显示第二通道信号，后3位显示第一通道信号-Microcontroller code. The experimental board two analog voltage signals into digital signals and display in decimal form, the first three shows the second channel signal, after the three sho
Ccs.Inc.-.PICmicro.MCU.C.-.An.introduction.to.Pro
- pic micro muc an introduction to programming the microchip pic in c
2x16_lcdeeprom
- hi-tech c 16f877 in eeprom
display2
- hi tech c 16f877 seven segment
128641
- 液晶显示驱动程序，调试通过，适合手持式设备使用-LCD driver, debugging through, for handheld devices
ATMEGA406
- Program source ATMEGA406 design code of IC battery manager use SBS control
auto-complete-1.3
- emacs lisp 输入代码时候，能够自动补全。-auto complete code
PLL_SET
- 设置直接使用外部晶振与使用PLL,10分频的源代码-Set directly and use an external crystal oscillator PLL, 10 frequency of the source code
TIMER_16_CAP_COUNT
- 使用KEY1输入边沿触发，用定时器递减计数，当计数值和匹配值相等时 ，进入中断：LED3的状态翻转，每按KEY1键四次，LED的状态改变一次-Using KEY1 input edge-triggered, with the timer count down, when the count value and matching values are equal, the interrupt: LED3 state flip four times each key press KEY1, LE
TIMER_16_PWM
- 将定时器设置为16位PWM模式下的相应配置-The timer set to 16-bit PWM mode, the corresponding configuration