资源列表
simple-AT89C51
- 认识AT89C51单片机的功能及简单应用-Understanding of the functions and simple AT89C51 Microcontroller Application
RTC
- 时钟芯片P5863时钟与89C51单片机的读写通信-the communication between p5863 and 89c51
Pipelined-and-Parallel-Recursive-and-Adaptive-Fil
- Pipelined and Parallel IIR Recursive and Adaptive Filters design for hardware implementation
HONGLVDENG
- 该倒计时交通灯由三种颜色（红、绿、黄）的LED灯组成，放置于东西与南北方向路口。该交通灯设计了对电池的充放电保护电路，当电池放电小于10.6V时，关闭所有灯。当电池充电大于14.48V时，关闭充电，从而有效的保护了电池并且增加了该产品的使用寿命。该系统默认东西方向为主干道（放行30s），南北方向为次干道（放行20s）。-The countdown traffic lights by the three colors (red, green, yellow) is composed of LED
Design-data-collection-system
- 单片机课程设计 数据采集系统的设计 胡仁杰 时斌 电气工程学院 2005年6月 -MCU Design data collection system when the Bin Hu Renjie Electrical Engineering June 2005
celtius_mm7_sdk_brochure
- great book for mm7 developers
Sensor
- 可集中在一台电脑的串口上挂接几十个的漏水传感器源代码；485通信总线，PC通信；-Can be concentrated in a computer' s serial port leakage sensor mounted dozens of source code 485 communication bus, PC communication
AD
- 程序实现A/D转换功能，A/D采用中断方式。该程序通过单片机的RA2模拟通道送入一直流电压，当送入的直流电压大于2.5V时，与PORTD口相连的8个发光二极管闪动，当直流电压恢复到2.5V以下时，发光二极管停止闪动，且只有低四个发光。-Program for A/D conversion, A/D with interrupt. RA2 through the program the microcontroller analog channels into a DC voltage into D
33students-designed
- 33个大学生的毕业设计，包含了单片机的各种应用，展示了单片机的接口，和程序-33 graduate students designed a variety of applications including the microcontroller, the microcontroller interface display, and procedures
PICMCUCAN
- 该程序实现发送缓冲器0向接收缓冲器0发送数据的自测试模式，其中接收采用中断方式 发送采用查询方式；PIC单片机的CAN通信；-The Program for transmit buffer 0 0 send data to the receiving buffer of self-test mode, which used to receive queries sent by way of interruption PIC microcontroller CAN communication
keyboard_check
- //本程序用于键盘的识别，通过编程，使按下K1键时第一个数码管显示1，按下K2键时第一 //个数码管上显示2，按下K3键时第一个数码管上显示3，按下K4键时第一个数码管上显示4， //对键盘的扫描采用查询方式-This program is used to identify the keyboard, by programming, so that when you press the first key K1 digital display 1, the first key press
PI_MBUS_300
- Complete Modbus Protocol Specification