资源列表
FAT16
- STM32的FAT16详细程序，值得参考！-STM32 FAT16 detailed procedures, is worth considering!
display-0-F---for-HJ-52
- STC12C5A60S2+HJ-C52板，8位数码管同时显示0-F-STC12C5A60S2+HJ-C52 board,display 0-F at the same time on both of the 8 SEGs.
DS18B20-to-LED----for-HJ-C52
- DS18B20+STC12C5A60S2+HJ-C52,处理传感器数据，显示在三位数码管上，温度范围0-25.5度。-DS18B20+STC12C5A60S2+HJ-C52 board,get the data from the sensor,displays it one the first 3 SEGs,with the range 0-25.5 centigrade
DS18B20-to-serial----for-HJ-C52
- DS18B20+STC12C5A60S2+HJ-C52,传感器数据传至电脑，串口精灵接收。-DS18B20+STC12C5A60S2+HJ-C52 board,transmit the data from the sensor to PC s serial port,received by the software Serial Port Fairy.
PWM-LED
- AT89S52+TX-1C,PWM输出，2按键加减，当占空比达到最高，最低时，2LED亮起指示-AT89S52+TX-1C board,output PWM,use 2 buttons add or minus DutyCycle,2 LEDs will be on when the DutyCycle gets the max or the min
led
- 嵌入式例程，用于stm8s 嵌入式例程，用于stm8s-Embedded routines
1820-LED-serial
- DS18B20+STC12C5A60S2+HJ-C52+串口精灵。传感器数据显示在SEGs上，并同时传给电脑串口，串口精灵显示。-DS18B20+STC12C5A60S2+HJ-C52，display the data from DS18B20 on the 3SEGs,an transmit it to the PC serial port an the same time
0-999-counter
- 0-999 counter,2按键加减，短按变1，1以上长按变10--999 counter,2 buttons add or minus,change 1 unit with press shortly,change 10 units with hold the button long than 1s.
11.11
- 基于80c51单片机实现的DS18b20温度采集系通-Based on the acquisition a 80c51 MCU DS18b20 temperature system through
0804
- 用ADC0804芯片做的电压表程序，并且用1602液晶显示器显示电压，ad的简单操作-ADC0804 chip to do the voltmeter program, and the simple operation of the voltage, ad 1602 LCD display
0809
- 用ADC0809芯片做的电压表程序，并且用1602液晶显示器显示电压，ad的简单操作-ADC0809 chip to do the voltmeter program, and the simple operation of the voltage, ad 1602 LCD display
PWM
- 一个简单的单片机PWM程序。使用c语言进行编写。-A simple microcontroller PWM program. Use c language to be written.