资源列表
STC-UART
- 单片机串口程序，比较全了，根据硬件修改即可-Example 6 22 51 microcontroller simulation proteus-based serial port to send and receive string instance
Timer1
- stm8s定时器1读写程序,可设置想要的定时器中断时间-stm8s Timer 1 literacy program, set the desired timer interrupt
xianshijiemain
- 通过C8051F单片机实现读取SD卡字符并显示在LED屏上-By C8051F MCU read SD card characters and is displayed on the LED screen
17-TMR1-Control-Traffic-Light
- 基于单片机开发的交通灯系统，具有实时报警功能，可以调节交通灯的红黄蓝灯亮和闪烁的时间。-The traffic light system based on single chip, with real-time alarm function, red yellow blue light can control the traffic lights bright and shining time.
Control-Cross-Road-Traffic-Display
- 带实时计时显示的交通灯系统，可实时显示剩余等待时间，同时也可以通过编写代码改变其时间。-The traffic light system with real time display, real-time display the remaining waiting time, also can write code to change the time.
19-TMR1-Counter-LT-10000
- 用工作于计数方式的TMR1实现按键或脉冲计数，每按键一次记录为1，可以累加和复位。-With the work in the way of counting the TMR1 key or pulse counting, every button once for a record 1, can be accumulated and reset.
project
- 51单片机控制SD卡，并将SD卡中的字符分割存入数组，为下一步开发做准备。-51 MCU control SD card and SD card characters split into an array, to prepare for the next development.
20-Door-Bell-Designed-by-Timer
- 用定时器来设置门铃，每当按键按下的时候，单片机记录端口为低电平，导通门铃响铃电路，发出预置的铃声。-Use a timer to set the bell, when the button is pressed, the recorded port is low, conducting doorbell ringing circuit, a preset tones.
test7
- 51单片机控制FY-50-6448屏实现通过字库读取英文字符-51 single-chip control FY-50-6448 screen font to read English characters
Temp
- 温度检测，此程序用于通过51单片机控制ds18b20温度传感器检测温度。-Temperature detection, this program for 51 single-chip control DS18B20 temperature sensor detects the temperature.
nrf905_5keys_51
- 用于51单机上连接NRF905无线模块的SPI通信，并且可以用按钮输入值进行相应的控制以及程序的便携。并且本资料分了master主控端 以及slave接收端的程序，经过本人的验证十分好用。-51 stand-alone connected NRF905 of wireless module SPI communication, and can use the buttons to enter the value of the corresponding control and program p
XGATE
- MC9S12XDP512单片机定时器功能，并且可以使用XGATE-code for the xgate of MC9S12XDP512