资源列表
ir_remote_v2
- 434 MHz 8 channel Remote control using PIC16F630 micro-controller. the file contains tx/rx
clock
- this a ds1302 clock signal code using c.-this is a ds1302 clock signal code using c.
Robotc511
- 小车机器人程序,用于导航、巡迹、输出和输入，基于KEIL C，已调试通过。-robot
s3c2410
- S3C2410完全开发流程 面向由传统51单片机转向ARM嵌入式开发的硬件工程师、由硬件转嵌入式软件 开发的工程师、没有嵌入式开发经验的软件工程师-S3C2410 complete development process for the shift from the traditional 51 MCU ARM embedded development hardware engineers, embedded software development by the transfer of
TLC5615
- 51单片机 30数模TLC5615 C代码 -51 microcontroller code 30 digital-analog TLC5615 C
IRdecoding
- 51 单片机 红外解码 C语言代码 lcd1602显示-51 SCM infrared decoder C code
Temperatureacquisition
- 51单片机 温度采集DS18B20(LCD)-51 Single-chip temperature measurement DS18B20 (LCD)
DS1302
- 51 单片机 时钟DS1302(LCD)-51 MCU clock DS1302 (LCD)
74HC595
- 在51单片机上实现用两片74HC595驱动八位数码管-51 SCM in achieving the eight with two 74HC595 drive digital control
shumaguan
- 数码管显示，流水灯发光，最后全部闪烁3秒停止。数码管显示单词he-Digital display, light emitting water, and finally all the flashes for 3 seconds to stop. Digital control word hell
LM3S_Demo(IAR511)
- LM3S811编程指南 LM3S_Demo(IAR511)-LM3S811 Programming Guide LM3S_Demo (IAR511)
Key
- 实现4个按键的按下，抬起，长按，作为触发事件来处理相应的函数。-Achieve four keys pressed, lift, press and, as a triggering event to deal with the corresponding function.