资源列表
TLC5615DA
- 利用TLC5615DA进行D/A转化， 通过HC4094扩展IO来驱动点阵LED。-Using TLC5615DA for D/A conversion
tc9012-011
- 本程序主要是遥控器解码和1602驱动程序 // 功能:解码红外遥控器 // 遥控器芯片:tc9012-011 -This procedure is mainly remote decoding and the 1602 driver// Function: Decoding Infrared Remote Control// Remote Control Chip: tc9012-011
12864
- 利用12864显示图片等显示器实验。带有详细注解。-12864 show display pictures using experiments. With detailed notes.
Waveform
- 设主频为12MHz，利用定时器T0定时。工作在方式1，使P1.1输出周期为5ms (其中高电平为 3ms低电平为2ms)的周期波形。-Set frequency to 12MHz, using timers T0 timer. Work in Mode 1 to P1.1 output cycle 5ms (which is high for the 3ms low as 2ms) of the periodic waveform.
SquareWave
- 从P1.0脚输出周期为2ms的方波，用查询方式工作，查询标志为TF1。（占空比50 ）-Output from P1.0 pin 2ms square wave period, work with query mode, query logo TF1. (Duty cycle 50 )
BWS--c51
- BWS指纹识别模块51单片机开发程序包，可以满足一般产品开发的需要。里边help文件有详细的说明-BWS fingerprint recognition module 51 MCU development package to meet the needs of the general product development. Inside help file has detailed instructions
syzd
- 编写一实验程序，使用实验装置提供的中断源，完成按键中断的响应。每产生一次按键中断，向显示器输出字符‘7’。-Preparation of a test program, use the experimental device to provide the interrupt source, interrupt the completion of the response buttons. Generate a key for each interrupt output to the displa
Pulsemeasurement
- 用T0监视一生产流水线，每生产100个工件，发出一包装命令，包装成一箱，并记录其箱数。-T0 monitoring a production line with every production of 100 parts, issued an order packing, packing into a box, and record the box number.
Serialcommunication
- 串口通信，P1.1接的按键控制选位（按下时上面的灯亮），P1.2接的按键控制所选位加1 （按下时下面的灯亮）。-Serial communication, P1.1 access buttons control the selection bit (when pressed lights above), P1.2 access buttons control the selected bits plus 1 (pressed, the following lights).
crypto
- ATmel Crypto IC Read & write Source code
tlc1543
- tlc1543进行A/D转化的子程序，有详细注解，可以直接应用。-tlc1543 for A/D conversion routines, detailed annotations, can be applied directly.
danpaijifuxiziliao
- 单片机的基本知识的复习资料，提供详细的学习单片机原理的说明文档。-Review basic knowledge of SCM information to provide detailed documentation to learn SCM principles.