资源列表
testXEP100PLL
- 这是飞思卡尔单片的MC9S12XEP100的一个演示程序文件-This is a complex work environment modeling software, this software is the detailed tutorial in the area
line
- 用AT89C52做CPU，用键盘输入数字，用LED显示闪动
Send_net
- 用单片机控制STR30模块实现800米以内的无线控制，广泛用于工厂车间，医院等场所，它需要两个模块，以实现接受和发送-Module with the MCU control STR30 within 800 meters of wireless control, are widely used in factory floor, hospitals and other places, it requires two modules to achieve the acceptance and se
ourdev_540339
- mega16 +1602+DS18B20-control chip, DS18b20 test temperature, accurate to show the temperature value 0.1,1602. PD4 as 16b20 single bus, PD765 as the 1602 Line of Control, PA as the 1602 data lines
KYA
- 单片机温度控制报警系统+万年历+pcb+sch+程序源码 -Temperature Control pcb+ sch+ program source code
key
- 基于雨亭的51/AVR单片机开发板的按键扫描程序，在定时器中断中定时扫描，使用状态机进行按键去抖，与延时扫描相比效率较高，占用资源少-Yu Ting s 51/AVR microcontroller based development board scanner button, the timer interrupt in time scan, using the state machine button to shake, as compared with the delayed scan m
led_dynamic
- 基于雨亭的51/AVR单片机开发板的动态数码管显示程序，在定时器中断中定时刷新，，与延时扫描显示相比效率较高，占用资源少；在刷新显示内容时，进行了消隐处理，不会出现重影的现象-failed to translate
timer0
- 51c语言程序，定时器0的中断程序，同时带有十六进制生成可下载文件-timer0 for MCS51 interrupt
avr128kongzhigsm
- avr128单片机控制西门子 tc35 模块发短信-avr128 control gsm sent message
PC-com-receiver
- 利用红外接收管检波后的信号送入串口1脚进行解码处理，根据预设的键盘码进行遥控器模拟击键。-After receiving tube infrared detector signal into the serial port 1 pin decode processing, according to preset remote control codes simulate keyboard keystrokes.
iic
- i/o模拟i2c程序，非常好用。速率可以通过延时时间长短来调整。-i/o simulation i2c program, very easy to use. Rate can be adjusted by the length of time delay.
pysr
- 使用单片机为硬件平台，简易拼音输入。有参考价值。-Use of microcomputer hardware platform, simple phonetic input. A valuable reference.