资源列表
MSP430DS18B20
- MSP430高级开发板上的DS18B20温度传感器的程序 当前演示程序功能描述,循环进行温度检测,将结果分别保存在 -Descr iption of the current demonstration program features: temperature cycle testing, the results were kept in temperature ResultSignal symbol (0x01 negative) ResultTemperatureH tempera
24c02
- 单片机C语言，用于读和存数据于EEPROM2402，已测试-Single-chip C language, for reading and keep data in EEPROM2402, have been tested
1602
- 单片机开发，液晶1602的用法，如显光标，移动等-Developed single-chip, liquid crystal 1602 is used, such as marked cursor, move, etc.
examplefords18b20
- ds18b20温度报警，用c语言编写，完成温度设限，越线报警功能。-ds18b20 temperature alarm, with c language
iica
- 单片机开发，IIC总线的C语言编程，已测试通过-Single-chip development, IIC Bus C language programming, have been tested
LED8_roating
- 使用KEIL环境μVision2版本，8段数码管循环显示0-F，共阳数码管，使用的单片机不同段表需要改变，此处用的是PHILIPS公司的P89V51，段表修改过以后可用于通用的C51单片机-KEIL environment μVision2 use version 8 digital tube display cycle 0-F, a total of Yang digital tube
LCD_SPI_picture
- 英陪特M3开发板 STM103V100 LCD_SPI_picture图像显示程序c语言源程序-STM103V100 LCD_SPI_picture display c code
EEPROM
- KEILμvision2版本，PHILIPS公司的P89V51单片机，EEPROM：AT24C256（32K），从串口读取10个数据，然后存储到EEPROM中，在串口输出并数码管显示-KEILμvision2 version, PHILIP s P89V51 single-chip, EEPROM: AT24C256 (32K), read from the serial port 10 data, and then stored in the EEPROM, in the serial out
EP_Interrupts
- 基于cy7c68013的usb2.0通讯程序，批量中断传输方式例程-this bulk loopback firmware based on the firmware frameworks. Loops back EP2OUT to EP6IN and EP4OUT to EP8IN. Building this example requires the full version of the Keil Tools.
Dev_io
- 基于CYPRESS CY7C68013 usb2.0的开发程序，该程序演示了访问IO的编写方法。-This directory contains the dev_io 8051 firmware The purpose of this software is to demonstrate how to use the buttons and LED on the EZ-USB developer s kit. The device I/O example progr
Memtest
- 基于CYPRESS CY7C68013 usb2.0的开发程序，该程序演示了访问内存的编写方法。-This directory contains the memtest 8051 firmware for the Anchor Chips EZ-USB chip. The purpose of this software is to test the different memory segments in the Ez-Usb chip. This example
Bulkext
- bulkext is FX2 bulk loopback firmware. It loops back EP2OUT -> EP6IN and EP4OUT -> EP8IN The loopback is performed using the external auto pointer. Data is copied from the OUT endpoint buffer to external RAM and then to the IN endpoint