资源列表
PCA
- PCA工作在8位脉宽调制器工作方式，由P0.0输出一个占空比为0>>0xfe>>0的PWM 信号且重复输出，可用示波器观察占空比变化。。使用外部22.1184MHz晶振。-PCA in 8-bit pulse-width modulation methods of work, a duty cycle output from P0.0 to 0> > 0xfe> > 0 and repeat the PWM signal output, duty
0537code
- NEC单片机0537demo开发板的程序-NEC single-chip process development board 0537demo
DS1302
- 基于pic的DS1302串行实时时钟程序-Pic based on the DS1302 serial real-time clock procedures
xinhaofashengqi
- 简易信号发生器：有原理图，仿真图，C程序，功能比较齐全-Simple Signal Generator: A schematic diagram, simulation plans, C procedures, functions relatively complete
AT24C256
- AT24C256是ATMEL公司256kbit串行电可擦的可编程只读存储器，8引脚双排直插式封装，具有结构紧凑、存储容量大等特点，可以在2线总线上并接4片该IC，特别适用于具有高容量数据储存要求的数据采集系统。本文将介绍该IC的工作原理和与单片机的软硬件接口。-ATMEL Corporation AT24C256 is 256kbit serial electrical erasable programmable read-only memory, 8-pin double-line packa
Logic_analyzer
- 自制简易红外逻辑分析仪的单片机源程序，基本能完成我们的要求-Simple home-made infrared of single-chip logic analyzer source code, the basic requirements to complete our
1602shizhong
- 用51内部定时器在Keil uVision3环境下开发的，可调时间和日期的数字钟，并用1602进行显示。-With 51 internal timer in the Keil uVision3 development environment, the time and date Adjustable digital clock, and display 1602.
MyUsbDevice
- 自定义的USB设备单片机固件程序，基于PDIUSBD12 usb接口芯片-Custom single-chip USB device firmware, based on PDIUSBD12 usb interface chip
UsbMouse
- HID usb设备的单片机固件程序，能自己用单片机控制鼠标。-HID usb device microcontroller firmware to control their mouse using single-chip microcomputer.
12864
- 在Keil uVision3环境下开发的，用12864显示图片和字符和汉字程序-Keil uVision3 environment in development, and show pictures and 12,864 Chinese characters and procedures
DS18B20
- 通过DS18B20读取温度（范围-55C~125C，精确到小数点后一位），通过4位数码管显示出来。 当温度为正且百位为零时，不显示，当温度为负时百位显负号。当温度百位和十位都为0时0都不显示。-Read through the DS18B20 temperature (range-55C ~ 125C, accurate to one decimal), through four digital tube display. When the temperature is zero and 100
UsbToUart
- usb转串口单片机固件程序，能实现usb-232的双向转换-usb to serial single-chip firmware, usb-232 to achieve the two-way conversion