资源列表
adfCtrl
- 本例子说明如何用pic16f690来控制adf4360-4，可同时支持两个频点输出。程序内还包含3*4键盘实现源码。pic16f690只有20个引脚，该程序已调试通过，得到应用，极具参考价值。-This example shows how to use the pic16f690 to control adf4360-4, which can support two-frequency output. Within the program also contains the source cod
ADC-STC12C5A60S2-STC12C5620AD
- 基于单片机STC12S5A60S2的AD转换程序-Based on the AD converter MCU STC12S5A60S2
AD
- 实现AD转换，2812的AD采样：采两路信号，每路观察到两周波，其它参数自定-Achieve AD conversion, 2812' s AD sampling: mining two signals, each channel waves were observed for two weeks, since the other parameters set
The_demo_of_STM32_TIM1
- STM32奋斗板-TIM1的PWM演示 可以进行修改，并在通类型开发板上运动-STM32 PWM hard board-TIM1 the presentation can be modified, and in the sports development board through the type
DDS_Proteus
- DDS电路Proteus仿真Proteus simulation DDS circuit -Proteus simulation DDS circuit
MBUSprotocol
- MBUS协议 The bus communication system of EN1434-3 is commonly called M-Bus. Its application layer describes a standard especially for meter readout. It can be used with various physical layers and with link layers and network layers which supp
USBHID
- LPC2378防USB键盘程序代码 使用MCB2300开发板，实现自制USB键盘例子-LPC2378 anti USB keyboard program code Use MCB2300 development board, realize the homemade USB keyboard examples
InfraredRemoteControlSimulation
- 红外遥控模拟用89C51，带有编码和解码程序-Infrared Remote Control Simulation
F340_i2c
- c8051f340的IIC应用程序，包括底层初始化，端口输出控制，时序控制等源程序-c8051f340 the IIC applications, including low-level initialization, the port output control, timing control source
msp430x54x_adc12_01
- msp430F5438单片机的12位AD程序-msp430F5438 MCU 12-bit AD programs
tslib.tar
- 经qte3交叉编译好的arm触摸屏程序，将其解压后全部拷到目标板即可使用。-Qte3 compiled by cross-arm touch screen procedures, after extracting all its Kaodao target board to use.
ADS1232
- AVR M16与ADS1232的接口程序，数据稳定。-AVR M16 interface program with the ADS1232, the data stability.