资源列表
1628
- led 驱动IC SM1628的范例程序-led drive IC SM1628 example program
PWMLED
- 利用定时器控制产生占空比可变的 PWM 波 按K1，PWM值增加，则占空比减小,LED 灯渐暗。 按K2，PWM值减小，则占空比增加,LED 灯渐亮。 当PWM值增加到最大值或减小到最小值时，蜂鸣器将报警-Set the timer to make the LED to light from dark to bright,and make the buzzer ring.
PCB_GND_DESIGN
- PCB板设计中的接地方法与技巧,希望大家通过本文章的学习都有所提高-PCB board design methods and techniques of grounding, hope that we learn through this article, have improved
UART0_PC
- LPC2214 串口驱动程序,列子中详细的给出了demo-LPC2214 uart driver
SSD2119_pdf
- SSD2119触摸屏的控制器资料，是英文的，适合240*320的tft液晶-SSD2119 controller touch screen information is in English, suitable for LCD 240* 320 tft
Siliconsch
- 德州仪器关于CC2430开发的原理图和PCB图-Texas Instruments CC2430 development on the schematic and the PCB map
c8051f410smsokv1-10.6
- c8051 新华龙 tc35短信模块成功收发程序-c8051 Hualong tc35 new module successfully send and receive text messages process
avr-ATmega16-Motor-turn
- avr ATmega16编程实现控制电机转动程序-Avr ATmega16 programming realize control motor rotation program
SSOP-28
- ssop-28的器件封装，还有些特殊器件的封装结构。-ssop-28 of the device package, and some special device packaging structure.
STM32F10x_StdPeriph_Lib_V3.3.0
- cortex-m3内核 STM32 芯片的硬件库程序，适合初学者和开发程序员使用。-STM32F10x_StdPeriph_Lib_V3.3 for stm32 programmer
UCOS-II-MSP430149
- 移植好的即时操作系统Ucos2程序，在MSP430F149上运行的，测试过，-Good real-time operating system Ucos2 transplant program running on the MSP430F149, tested,
PID
- pid算法 51单片机 带Proteus仿真程序-pid algorithm simulation program 51 microcontroller with Proteus