资源列表
TX-1C(C51)
- 郭天祥_十天学会单片机和C语言编程-讲课中涉及源程序-Guo Tianxiang _ ten days learn microcontroller and C programming language- the source involved in lectures
CanFestival-3-48bff18fc546
- can open statck protocol source code
语音智能车控制程序
- 语音智能车控制程序，实现人对智能车的起停和左右转等功能，运用到了语音识别，语音压缩，语音播报等知识。-Intelligent voice control car program
CH376_test
- 基于STM32内部的SPI模块通过CH376芯片进行与U盘进行数据交换，通过该程序可以了解文件系统知识。-Based on STM32 internal CH376 chip SPI module to exchange data with the U disk, through the program can understand the file system knowledge.
发光二极管亮灯时间控制程序
- 发光二极管间隔300ms先奇数亮再偶数亮,循环三次,一个灯上下循环三次,两个分别从两边往中间流动三次,再从中间往两边流动三次,8个全部闪烁3次,关闭发光管,程序停止-Interval of 300ms LED light and then even the odd first light, cycle times, a light cycle up and down three times, two each from the three sides to the middle of flow,
Driver
- LCD显示屏驱动,用ST7565芯片的适用,请根据你的硬件连接修改<Lcd_Drever.h>中的定义,本驱动针对STM32系列单片机,其它单片机请自行修改发<void LCD_write_byte(u8 dat, u8 command)>这个函数即可使用-LCD display driver, with the ST7565 chip application, please modify according to your hardware connections &l
program
- 以电感作为传感器，飞思卡尔MC9S12XS128芯片作为主控制单元，实现小车在赛道上循迹-The inductance as a sensor, Freescale MC9S12XS128 chip as the main control unit, the car on the track to achieve tracking
按键显示 加减数码管显示
- 按键显示 加减数码管显示 简单易学的 单片机51 汇编程序-The pressed key demonstrated that the addition and subtraction nixietube demonstrated simple easy to study monolithic integrated circuit 51 assembly programs
ds1302-lcd
- 基于51单片机的ds1302时钟芯片使用，c语言编程-Based on 51 single-chip ds1302 clock chip used, c programming language
keyPled
- 单片机按键测试程序，通过按键控制LED灯的开关，汇编语言编写-SCM key test procedures, control LED lights by key switch assembly language
main
- 用定时器 1 来改变小灯的状态，T1 每溢出两次，1 个 LED 灯闪烁，1 个 LED 灯改变当前 状态。 -Timer 1 with small lights to change state, T1 overflow twice each, an LED flashes, an LED light to change the current state.
EEPROM
- 基于m16单片机的eeprom编程，有具体源代码和烧写文件等-M16 eeprom microcontroller based programming, there are specific source code and programming documents