资源列表
8、智能车超声波避障碍程序跟着物体前后走
- 基于51单片机的智能小车，超声波，可以跟着物体前后走(Based on 51 MCU smart car, ultrasonic, can follow the object before and after.)
任务调度（256）
- 产生双通道信号源以输出所测量的信号和干扰信号。测得的信号为正弦波（测试点为端），有效值为10mV~1000 mV，频率范围为10Hz～10kHz。干扰信号（测试点B端）可以选择输出的正弦信号和方波信号，正弦信号的幅度10mv ~ 100mV的频率范围为10Hz ~ 10khz；方波的频率为50Hz，振幅为100mV；(A dual channel signal source is produced to output the measured signals and interference s
简易信号发生器
- 使用STM32F103产生基本波形，频率可自定义(Use STM32F103 to generate basic waveform, and frequency can be customized.)
lanya2
- 在keil中测试HC05主从机蓝牙模块，实现基本通信，完成测试、。(In keil, we test the HC05 master slave Bluetooth module, realize the basic communication, complete the test.)
DSO138
- 基于stm32的示波器，简单好用，配套硬件使用，欢迎大家测试(STM32 based oscilloscope, simple and easy to use, supporting the use of hardware, welcome to test)
Desktasdopasdasdas
- Calling you now, but you're not picking up Shadows so close if that's still enough Light a match, light a match
RAM调试—多彩流水灯
- 可以实现stm32的流水灯开发，让灯循环点亮(Water lamp development of STM32 can be realized)
stc12c5a60s2串口收发
- stc12c5a60s2温度控制源程序代码(stc12c5a60s2temperature controlSource code)
ColdFire编程参考手册(中文)
- 本手册包含了所有版本 ColdFire 微处理器指令集体系的详细信息。(This manual contains detailed information on the collective instructions of all versions of ColdFire microprocessor instructions.)
BMP280
- 获取BMP280气压计的温度、气压、海拔。内部自带驱动和用户移植接口，非常方便开发人员开发。(Users can use this driver files of BMP280 to get altitude, pressure and temperature. It is very convenient to cross-platform.)
stm32f103zet6核心板资料
- stm32f103zet6核心版资料，内含电路图、数据手册(Stm32f103zet6 Core Edition. include circuit diagram and Data Handbook)
IIC-24C02基本读写
- 51单片机IIC总线实现24C02基本读写(Basic reading and writing of 24C02 by IIC bus)