资源列表
stm32 FFT
- stm32进行AD采样dma传送进行快速fft，同时包含MAX197驱动，但是ad采样时没有使用，需要的话也可以自己添加使用(Stm32 performs AD sampling dma transfer for fast fft, and includes MAX197 driver, but it is not used when ad sampling. If you need it, you can add it yourself.)
跑马灯程序
- pic16f887的跑马灯程序，主要以中断控制和time0控制为主(Pic16f887 running horse lamp program, mainly to interrupt control and time0 control)
8051驱动HL-292M模块
- //1、At89S51的P1口为TDS值输入； //2、P3口为温度值输入； //3、P0口为TDS和温度的显示值； //4、P2.0、P2.1、P2.2为工作状态数码管的信号值； //5、P2.3为74HC595的SER，P2.4为74HC595的CLOCK； //6、P2.5是制水信号输入，P2.6是制冷信号输入，P2.7是加热信号输入。
ida_msp430_v12
- 进行msp430F149的二进制文件到汇编文件的反编程·(Perform the inverse programming of the msp430F149 binary file to the assembly file.)
封装
- PCB常用封装，可以用于实际PCB开发，保证靠谱(PCB Common Packaging)
5 , MiniFly V1.3
- 四轴飞行器代码 包含所有 PID 控制高度 控制距离角度 运算(four feet plane messege include pid and angle elc)
AD
- 由52单片机编程,模拟信号经AD转换成数字信号，并在1602液晶屏上显示。(The analog signal is converted into digital signal by AD, which is programmed by 52 single chip computer and displayed on LCD 1602 LCD screen.)
【实验28】AD数码管显示电压
- PIC16F877开发板例程————AD数码管显示电压(PIC16F788 development board program --- AD digital tube display voltage)
FX2N -32MT schematic
- FX2N -32MT schematic
用PG12864LCD设计的指针式电子钟
- 用PG12864LCD设计的指针式电子钟(Pointer Electronic Clock Designed with PG12864 LCD)
OBD故障码解析
- OBD系统开发时OBD故障码解析，含大部分整车生产企业自定义的代码以及通用代码(OBD fault code parsing during the development of OBD system, including custom codes and general codes of most vehicle manufacturers)
mcp2515
- MCP2515 驱动，直接修改mcp2515.h里面端口即可移植使用。(MCP2515 driver, directly modify the inside ports of mcp2515.h can be transplanted.)