资源列表
adc
- A/D转换 //软件思路：选择RAO做为模拟输入通道； // 连续转换4次再求平均值做为转换结果 // 最后结构只取低8位 // 结果送数码管的低3位显示-A/D conversion// Software Ideas: Select RAO as analog input channels // continuous conversion four times the average demand as the conversion result// Finally struc
AVR_voltage_AD_measure
- AVR单片机实现ad采样测量电压有效值的程序，课设的时候用的-AVR Microcontroller ad rms voltage sampling measurement procedures, when used class-based
Temperature-Controller
- 温度控制器 用1602显示 AD DA采样，-Temperature Controller
AD_LED
- STM32F103ARM单片机，根据AD采集数值进行数据统计及LED指示灯显示。-STM32F103ARM microcontroller, based on statistical data AD acquisition value and LED indicators.
CAN-test
- CAN测试收发数据，测试can的自环通信，检测can通信是否调通-CAN test send and receive data
AN0-CCP1-V2
- PIC16F877A A/D转换方法，CCP1的PWM功能使用方法。 将A/D转换值直接写入PWM作为占空比参数，用RC2驱动发光二极管。-PIC16F877A A/D conversion method, CCP1 of the PWM feature uses method. The A/D conversion value is directly written into the PWM as an duty cycle is parameter, Used RC2 drive the
DS18B20-1602
- PIC16F877A 使用温度传感器DS18B20 根据DS18B20的读写时序，取得当前的温度值，并在1602液晶上显示出来-PIC16F877A using DS18B20 temperature sensor DS18B20 based on the read and write timing, get the current temperature value, and displayed on the LCD in 1602
INT-PS2-1602
- PIC16F877A RB0引发外部中断的使用方法，学习PS/2接口键盘解码的方法 按下PS/2键盘按键后，将引发外部中断，进入中断后，对键盘数据线进行判断，以判断出是哪个按键 按下，并利用1602液晶，将该键显示出来。-PIC16F877A RB0 interrupt caused by the use of external methods, learning PS/2 keyboard interface method of decoding press PS/2 keyboard
KS0108-12864-BMP
- PIC16F877A 学习12864液晶(驱动芯片KS0108)的驱动程序编制方法。 程序运行后，液晶上显示美女图片-PIC16F877A study 12864 (driver chip KS0108) driver compilation method. After running, beautiful pictures displayed on the LCD
Nokia3510i-LCD
- AVR Mega8 驱动Nokia3510i彩色LCD-AVR Mega8 drive Nokia3510i color LCD
SPI-74HC595-4LED
- PIC16F877A+74HC595芯片的使用方法,硬件SPI驱动74HC595，利用74HC595驱动4位数码管-PIC16F877A+74HC595 chip to use the hardware SPI driver 74HC595, 74HC595 drive using the four digital tube
Current-Source
- 数控直流电流源 源代码 keil编译 stm32开发平台-数控直流电流源 源代码 keil编译 stm32开发平台