资源列表
Control-Cross-Road-Traffic-Display
- 带实时计时显示的交通灯系统，可实时显示剩余等待时间，同时也可以通过编写代码改变其时间。-The traffic light system with real time display, real-time display the remaining waiting time, also can write code to change the time.
19-TMR1-Counter-LT-10000
- 用工作于计数方式的TMR1实现按键或脉冲计数，每按键一次记录为1，可以累加和复位。-With the work in the way of counting the TMR1 key or pulse counting, every button once for a record 1, can be accumulated and reset.
project
- 51单片机控制SD卡，并将SD卡中的字符分割存入数组，为下一步开发做准备。-51 MCU control SD card and SD card characters split into an array, to prepare for the next development.
20-Door-Bell-Designed-by-Timer
- 用定时器来设置门铃，每当按键按下的时候，单片机记录端口为低电平，导通门铃响铃电路，发出预置的铃声。-Use a timer to set the bell, when the button is pressed, the recorded port is low, conducting doorbell ringing circuit, a preset tones.
test7
- 51单片机控制FY-50-6448屏实现通过字库读取英文字符-51 single-chip control FY-50-6448 screen font to read English characters
Temp
- 温度检测，此程序用于通过51单片机控制ds18b20温度传感器检测温度。-Temperature detection, this program for 51 single-chip control DS18B20 temperature sensor detects the temperature.
nrf905_5keys_51
- 用于51单机上连接NRF905无线模块的SPI通信，并且可以用按钮输入值进行相应的控制以及程序的便携。并且本资料分了master主控端 以及slave接收端的程序，经过本人的验证十分好用。-51 stand-alone connected NRF905 of wireless module SPI communication, and can use the buttons to enter the value of the corresponding control and program p
XGATE
- MC9S12XDP512单片机定时器功能，并且可以使用XGATE-code for the xgate of MC9S12XDP512
hongwaijima
- 基于单片机控制的红外解码技术的源代码程序编写-Source code program to write MCU control using infrared decoding technology-based
dianzichen
- 一个电子称的接口实验，下位机的模拟电路接到AD,然后单片机控制AD采集，把采集的数据传到ｖｃ＋＋编写的上位机，实现重量的事实显示-The fact that said an electronic interface experiment, the next crew of analog circuit receiving the AD and SCM control AD acquisition, the collected data to the vc++ Prep
GPS
- GPS模块（GR87）驱动程序 MCU:STC12C5A60S2 说明：UART1中断接收查询发送-GPS module (GR87) driver MCU: STC12C5A60S2 Descr iption: UART1 interrupt reception send a query
C52_Clock
- 这是一个用C写的单片机时钟程序,具有显示\校准功能-This is a single-chip clock procedures, written in C \ calibration function