资源列表
CPCI_9056_Schematic
- cpci plx 9056 接口原理图 -cpci plx 9056 schematic
ILI9327-C51
- C51刷屏测试程序 ILI9327驱动程序，不过是并口16位驱动。-C51 scraper test the program ILI9327 driver, but the parallel port 16-bit drivers.
WEIGEN26
- PC解韦根26的代码！自己转换下，是用C语言写的！-PC solution Wiegand 26 code!
3208_V4.01.00
- 3208电子钟v4.1源程序适合升级版硬件-3208 Electronic Clock v4.1 source code
ds18b20
- ds18b20的上位机程序。本程序是基于vc++开发的。-ds18b20 the host computer program. This procedure is based on vc++ development.
lcd12864
- lcd12864的基本显示程序，采用的模块化的编程方式。-lcd12864 basic display program, the use of modular programming.
adc0804_1
- adc0804基本程序的编写，并将ad测得的数据显示出来。-adc0804 basic procedures for the preparation, and ad data obtained is displayed.
timers
- 关于定时器的使用，里面包含了两个工程，一个是用模块化编程写的程序，另一个则不是的，通过对比可以让人更加了解模块化编程的好处-The use of the timer, which contains two projects, a program written using the modular programming, the other is not, by comparing people a better understanding of the benefits of modular
ds18b20
- 在前4个数码管上显示当前采集到的温度。注意显示温度精度程序的编写，用串口将采集到的温度数据实时发送至上位机，在上位机软件商显示当前温度值。-4 digital tube display currently collected temperature. Note to display the temperature accuracy of program preparation, real-time temperature data will be collected using the seri
OCMJ320240-C
- 金鹏OCMJ320240液晶模块C程驱动，不错的驱动程序，希望对您有用！-Jinpeng OCMJ320240 LCD module C-way driver, good driver, hope useful for you!
001(2008.09.05)_v2
- ML9636参考原理图,DSRC,ASK,ETC通信用-ML9636 REFERENCE SCHMATIC FOR DSRC,ASK AND ETC COMMUNICATION
I2C_forC51
- 归一化模拟I2C总线软件包(C51)，可以当做测试，具体的可能其中有引脚和端口的配置才可以在你的方案中使用-I2C MCS_51