资源列表
ADC
- 采集外部模拟电压,采用ADC0通道0,内部VREF,并显示于LED上.-External analog voltage acquisition using ADC0 channel 0, the internal VREF, and displayed on the LED.
CP1
- 此程序可完成CP1比较器的比较功能，比较器基准信号来自于VREF引脚, 比较器响应后将产生中断,可在中断程序中设断点观察.-This program can complete the comparison function of the comparator CP1, the comparator reference signal from the VREF pin, the comparator generates an interrupt response will be set b
DAC0
- 本例直接采用应用笔记案例.实现DAC模拟信号输出，由T4定时控制DAC0输出DTMF信号-Application note in this case by case directly. Realizing DAC analog signal output from the T4 output DTMF signal timing control DAC0
DS18B20
- 实现对DS18B20的读取，并在数码管上显示-Achieve DS18B20 read and displayed on the digital
I2C
- C8051F020 通过SMBus 与AT24CXX 接口的示例代码-C8051F020 through the SMBus interface with the sample code AT24CXX
pwm_lm3s811
- 只是一个lm3s811的pwm程序，程序的注释写的很详细，提供给大家学习cortex的pwm控制，不懂的可以加我QQ:397916230-Just a lm3s811 the pwm program, the program is very detailed written comments provided to them to learn cortex of the pwm control, I do not understand can be added QQ: 397916230
keil_project_module
- keil for arm的cortex m3s811的驱动库和模板文件，方便大家快速的进行开发，写程序不用进行其它的不必要的配置-keil for arm of the cortex m3s811 the driver library and template files, we facilitate the rapid development of written procedures without unnecessary configuration for other
cortex_m3s811_1602
- 1602的液晶程序，写好了模块，很方便的可以拿过来就用，只要改几个引脚就行了。-1602 LCD process, written a module, you can easily take over for use, as long as the change a few pins on the line.
jtd
- 用plc2000带操作系统做的交通灯 里面有很多文件 希望大家有用 -Plc2000 do with the operating system with the traffic lights there are a lot of hope that a useful document
iarembeddedworkbenchfortimsp430v3.40akeygenlz0.zi
- msp430 development environment crack
TM1638jilian
- 用TM1638实现数码管的级联，这样可以节省io管脚 是系统更稳定可靠-TM1638 achieve digital control with cascade, it saves io pin is the system more stable and reliable
modbusCS5532
- 利用modbus协议 通过单片机 把cs5532芯片转换得到的数字读取到上位机-Modbus protocol by using the cs5532 chip microcontroller digital conversion are read to the host machine