资源列表
shumaguan
- 4位数码管9999显示、普通按键加减，和加速加、加速减，同时在P1口显示数码管段位电平指示-4 digital tube display 9999, an ordinary key addition and subtraction, and accelerate plus, accelerate the reduction, while the P1 port Dan digital display indicates level
51-drive-LCD1602-C-file
- 51单片机驱动LCD1602的源程序，包括读、写、显示等功能-51 single-chip driver the LCD1602 source code, including reading, writing, and display functions
2
- 数码管显示，18B20做温度采集，实现温度控制系统。-Digital display, 18B20 do temperature acquisition, temperature control system.
yinyue
- 郭天祥的TX1C 开发板 蜂鸣器播音，源程序-Debates of TX1C development board buzzer broadcast, source code
hongwaikongzhijiqiren
- 利用红外遥控器，实现对机器人的控制，使之走动，停止-Infrared remote control, to achieve control of the robot, making walking, stop
msp430uart
- msp430单片机的串口收发源代码,及相关寄存器设置-msp430 MCU serial transceiver source code, and the related register settings
can-90c516rd
- can总线通讯源代码,应用sja1000来进行通讯-can communication use sja1000
LSD-TEST430F5438-01-DMA1.c
- msp430F5系列DMA程序，实现RAM存储空间存储（重复块传送）-Msp430F5 series DMA program, RAM storage space storage (repeat block transfer)
clkk
- === =时钟20:6=== === == 应先初始化状态寄存器 tx1714 EQU 7FFH PA EQU 05H PB EQU 06H PC EQU 07H PD EQU 20H IAR EQU 00H 间接寻址寄存器 TMR0 EQU 01H 定时器 STATUS EQU 03H 状态寄存器 BSR EQU 04H bank选择寄存器 PORTA EQU 05H I/0端口寄存器 PORTB EQU 06
PID
- AVR单片PID调节,调试已通过@性能比较稳定@
seg_7
- 此为一个点亮7数码管的0-99记数程序,通过每按动一下add键,数码管显示加一直到99,过程中按动RST键复位!
LCD
- 图形显示12232检测要用keil生成hex再用